Adding a Date Stamp when Shooting (PowerShot SX730 HS)
| Article ID: ART167828 |
| |
Date published: 05/16/2017 |
| |
Date last updated: 05/16/2017 |
Description
Adding a Date Stamp when Shooting (PowerShot SX730 HS)
Solution
| Solution |
The camera can add the shooting date to images, in the lower-right corner.
However, note that date stamps cannot be edited or removed, so confirm beforehand that the date and time are correct.
IMPORTANT
- In some shooting modes it may not be possible to configure the [Date Stamp] setting.
- For setting or changing the date and time, please refer to the [Setting or Changing the Date and Time (PowerShot SX730 HS)].
REFERENCE
- For a list of shooting modes in which the [Date Stamp] setting can be configured.
[  : Manual ] , [  : Aperture Value ] , [  : Time value ] , [  : Program AE ] , [  : Hybrid Auto ] , [  : Auto ] , [  : Sports ] , [  : Portrait ] , [  : Smart Shutter (  : Smile,  : Wink Self-Timer,  : Face Self-Timer) ] , [  : Fireworks ]
- The procedure for adding a date stamp to images during shooting is explained below.
1. Turn the camera on.
2. Press the [MENU] button.
3. Press the [  ], [  ] buttons to select [Date Stamp  ].
4. Press the [  ] , [  ] buttons to choose [Date] or [Date & Time].
- Press the [MENU] button when finished.
5. When [Date Stamp] is set to [Date] or [Date & Time], [ ] is displayed on the LCD monitor.
6. The [Date Stamp] will be added to the images as shown below:
 : [Date]  : [Date & Time]
|
| Related Info |
Setting or Changing the Date and Time (PowerShot SX730 HS) |
|
ID: 8203421400_EN_2
|
