Ask a Question

Changing the Aspect Ratio (PowerShot S95)

Article ID: ART107915 | Date published: 05/11/2015 | Date last updated: 08/15/2015
 

Solution

You can change the width to height ratio of an image.

Attention:
  • The following explanations are provided based on the assumption that the Shooting Mode is set to Program ().
  • In the following shooting modes, you cannot set the Aspect Ratio.

- Low Light (), Nostalgic (), Fish-eye Effect (), Miniature Effect (), Stitch Assist ()

1. Press the <Power> button on the camera.

2. Press the <FUNC./SET> () button.

3. The following window appears.

Operate the <directional buttons> up or down to select 4:3.

Operate the <directional buttons> left or right to select an aspect ratio of your choice.

After making these settings, press the <FUNC./SET> () button.

Aspect Ratio
Same aspect ratio as wide screen high definition televisions.
Same aspect ratio as 35mm film. Suitable for printing out 5" x 7" or postcard sized images.
Same aspect ratio as the screen of this camera. Suitable for printing out 3.5" x 5" sized images.
Square-shaped aspect ratio.
An aspect ratio well suited for portraits.

Note:

  • The aspect ratio for () and () images is fixed at ().
  • The digital zoom is only available in ().
  • You can also set the camera so that turning the <Control Ring> changes the aspect ratio.

SIMS Doc Id

0

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments