Ask a Question

Detecting a document double feed on my DR-M140II Scanner

Article ID: ART181877 | Date published: 04/13/2023 | Date last updated: 04/13/2023
 

Description

The DR-M140II scanner includes a function to detect document double feeds. By using this function, the scanner will automatically stop when it detects that multiple documents have been fed at the same time. You can also specify whether to save the scanned image after scanning has finished and continue scanning the document (double feed detection ignore function).

Solution

To use the double feed detection function, you must first open the scanner driver settings screen and enable double feed detection. It is also necessary to set [Rapid recovery system] to use the double feed detection ignore function.
 
  1. Open the scanner driver's Detail Settings screen.

     
  2. Click the [Error Detection] tab.

     
  3. Select either the [Detect by Length] or the [Detect by Ultrasonic] check box (or both).


     
  4. To use the double feed detection ignore function, open the [Others] tab and select the [Rapid recovery system] check box.


     
  5. Click the [OK] button and close the settings screen.

     
  6. Properly place the document in the scanner.

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments