There are two methods for connecting the DR-6010C scanner to a computer: USB connection, which makes use of a standard USB port on the computer, and SCSI connection, which makes use of a SCSI card installed in an expansion slot of the computer.

Do not connect a USB cable and SCSI cable at the same time.

Follow these steps to install the scanner using the USB connection:

1. Verify that the power switch of the scanner is OFF.
   If the power switch is in the ON position, push the switch to set it to OFF.
   
   
   
2. Plug the supplied power cord into the power connector on the back of the scanner.
   
   
   
3. Connect the power cord into an AC outlet.
   
   
4. Use the supplied USB cable to connect the scanner to the computer.