Printing with Easy Setup
This section describes the simple procedure for setting the Quick Setup tab so that you can carry out appropriate printing on this printer.
Load paper on the printer
Open the printer driver setup window
Select a frequently used profile
In Commonly Used Settings on the Quick Setup tab, select a printing profile suited for the purpose.
When you select a printing profile, the Additional Features, Media Type, and Printer Paper Size settings are automatically switched to the values that were preset.Select the print quality
For Print Quality, select Highest, High or Standard according to your purpose.
Important
- The print quality settings that can be selected may differ depending on a printing profile.
Select the paper source
Select Manual Feed or Rear Tray that matches your purpose for Paper Source.
Important
- The paper source settings that can be selected may differ depending on the paper type and size.
Complete the setup
Click OK.
When you execute print, the document is printed with settings that match your purpose.
Important
- When you select the Always Print with Current Settings check box, all settings specified on the Quick Setup, Main, and Page Setup tabs are saved, and you can print with the same settings from the next time as well.
- In the Commonly Used Settings window, click Save... to register the specified settings.
- To print by using the manual feed tray, perform the operation according to the instructions displayed on the screen.
Note
- If the paper settings on the printer driver differ from the rear tray paper information registered on the printer, an error may occur. For instructions on what to do if an error occurs, see "Paper Settings."
For details about the rear tray paper information to be registered on the printer, see the following: - When you set Media Type to Photo Paper Pro Premium Matte, Premium Fine Art Smooth or Matte Photo Paper in the printer driver, we recommend that you set Page Size to 4"x6" 10x15cm, L 89x127mm, or "XXX (Margin 25)" in the printer driver.
When a page size other than "XXX (Margin 25)" is selected, an error message may appear.
Select one of the page sizes in the displayed dialog box, or go to the Page Setup tab, display the Print Options dialog box, and change the Cancel the safety margin regulation for paper size setting.