If printed images are affected by banding in different colors across the sheet, execute [Adj.Quality] for automatic adjustment of the paper feed amount. There are two modes of adjusting the amount of paper is fed, Standard Adj. and Advanced Adj.. Advanced Adj. offers a wider range of adjustment than Standard Adj.. If using Standard Adj. does not eliminate streaks, or if streaks are quite noticable, try Advanced Adj.. Follow the steps below for standard automatic adjustment of the feed amount.
Important:
Note:
Follow the steps below to adjust the feed amount automatically.
1. Load one unused sheet A4/Letter-sized or larger when Standard Adj. is selected or two when Advanced Adj. is selected.
When using a roll, load a roll 10 inches (254 mm) or wider.
Note:
- Always make sure the loaded paper matches the media type setting. Adjustment cannot be completed correctly unless the setting value matches the loaded paper.
2. Press the Menu button to display MAIN MENU.
3. Press 
or to select Adjust Printer, and then press the 
button.
4. Press or 
to select Auto Band Adj., and then press the button.
5. Press or to select Standard Adj. or Advanced Adj., and then press the button.
6. Press or to select Yes, and then press the OK button.
A test pattern is printed for adjustment.
After reading the pattern, the printer automatically adjusts the feed amount and returns to online mode.
or 
to select Paper Details, and then press the 
button.
or 
to select the type of paper, and then press the 
button.
or 
to select Feed Priority, and then press the 
or 
to select Band Joint, and then press the OK button.