Automatic Redialing

You can enable or disable automatic redialing. If you enable automatic redialing, you can specify the maximum number of redial attempts and the length of time the printer waits between redial attempts.

Enable and specify the automatic redialing setting on Auto redial in Adv. FAX settings under Fax settings.

• Adv. FAX settings

Important

• While automatic redialing, the unsent fax is stored in the printer's memory temporarily until the sending fax is complete. If a power failure occurs or you unplug the power cord before automatic redialing is complete, all faxes stored in the printer's memory are deleted and not sent.

Note

• To stop automatic redialing, wait until the printer starts redialing, then press the Stopbutton.

• To cancel automatic redialing, delete the unsent fax from the printer's memory while the printer is on-standby for a redial operation. For details, see Deleting Document in Printer's Memory.

Manual Redialing

Follow the procedure below for manual redialing.

1. Check that printer is turned on.

2. Press the FAX button.

   The Fax standby screen is displayed.

3. Load documents on platen or in ADF (Auto Document Feeder).

4. Adjust the scan contrast and resolution as necessary.

   • Setting Items for Sending Faxes

5. Press the Menu/Wireless connect button.

   The FAX menu screen is displayed.

6. Select Redial, then press the OK button.

   

7. Select the recipient's number to redial, then press the OK button.

8. Press the Color button for color transmission, or the Black button for black & white transmission.

   Important

   • Color transmission is available only when the recipient's fax device supports color faxing.

Note

• For manual redialing, the printer memorizes up to 10 recent recipients dialed by entering the fax/telephone numbers. Note that the printer does not memorize any recipients dialed using the redial function or selecting from the directory.

• To cancel manual redialing, press the Stop button. To cancel a fax transmission while it is in progress, press the Stop button, then follow the instructions on the LCD.

• If documents remain in the ADF after the Stop button is pressed while scanning is in progress, Document in ADF [OK]Eject the document is displayed on the LCD. By pressing the OK button, the remaining documents are automatically ejected.