Article ID: ART169162 |
| |
Date published: 12/07/2017 |
| |
Date last updated: 01/22/2018 |
Description
You can load plain paper or photo paper.
Solution
Loading Plain Paper / Photo Paper
You can load plain paper or photo paper.
Important
- If you cut plain paper into small size such as 4" x 6" (10 x 15 cm) to perform trial print, it can cause paper jams.
Note
-
We recommend Canon genuine photo paper for printing photos.
For details on the Canon genuine paper, see Supported Media Types.
-
You can use general copy paper or Canon Red Label Superior WOP111/Canon Océ Office Colour Paper SAT213.
For the page size and paper weight you can use for this printer, see Supported Media Types.
-
Prepare paper.
Align the edges of paper. If paper is curled, flatten it.
Note
- Align the edges of paper neatly before loading. Loading paper without aligning the edges may cause paper jams.
-
If paper is curled, hold the curled corners and gently bend them in the opposite direction until the paper becomes completely flat.
For details on how to flatten curled paper, see Check3 in Paper Is Smudged / Printed Surface Is Scratched.
-
Load paper.
-
Open the paper support (A).
-
Pull out the paper output tray (B) and the output tray extension (C).
-
Load paper vertically against the far right of the rear tray WITH THE PRINT SIDE FACING YOU.
-
Adjust the paper guide (D) with the paper left side.
Do not slide the paper guide too hard against the paper. The paper may not be fed properly.
Important
Note
After loading paper on the rear tray, either of the Paper lamp lights up according to the paper size loaded last.
-
Check paper size setting.
If the paper size loaded on the rear tray is different from the Paper lamp indication (H), press the Paper Select button (I) to change the selection.
Note