Placing Folded Documents

Folio Scan enables you to scan documents that are larger than LTR/A4 and therefore do not fit in the feeder. (The maximum size is 11" X 17"/A3.)

To use the function, fold the center of the document in half lengthwise and place it into the feeder. The DR-C130 will scan sides and combine the scanned images into a single image.

• When folding the document, align the right and left sides and create a sharp, straight fold. Otherwise the document may jam or the image may not be aligned properly.
• The fold line itself will not be scanned. Keep this in mind if there is content such as photos, diagrams, or text that spans the fold.
• For Folio scanning, only the Bypass mode can be used. Place documents one at a time.
• Adjust the document guides to fit the width of the document. Otherwise, the image may scan as skewed or shifted.
• When scanning folded documents, switch the feed selection lever to (Bypass)
• When placing folded documents, place the document into the scanner so that the fold is on the right side. The side of the folded document facing you will become the right side of the combined image.
• When scanning a folded document, set [Scanning Side] on the scanner driver settings screen to [Folio].
• The maximum size for the combined image is A3.