Resetting the Toner Cartridge

1. Lift the scanning platform (A) until it is locked. (You will hear an audible "click.")
   
   
   
2. Open the toner cover (B), using the grip (A) on the right front side of the toner cover.
   
   
   
3. Remove the toner cartridge from the machine.
   
   
   
4. Hold the toner cartridge by its handle (A).
   
   
   
5. Reinsert the cartridge so that the protrusion on the right side of the toner cartridge (A) fits into the guide (B) located on the right side of the machine and slide it down parallel to the guide.
   
   
   
6. Push the toner cartridge to make sure it is properly set in the machine.
   
   
   
7. Close the toner cover using the grip.
   
   
   
8. Close the scanning platform.
   
   
   
   - Be careful not to get your fingers caught.
   - If you cannot close the toner cover, do not force it to close. Open the cover and make sure the toner cartridge is properly set in the machine.