| Printer |
iPF605 |
| Class |
24-inch |
| Ink Type |
Dye and pigment reactive ink: BK, MBK x 2, C, M, Y |
| Maximum Print Resolution |
2400x1200dpi |
Dimensions, Weight (Net)
W x D x H (mm), (kg) |
Main Unit |
997 (W) x 670 (D) x 344 (H) mm
approx. 45 kg (printer, output tray, manual feed tray) |
| w/ stand |
997 (W) x 870 (D) x 993 (H) mm
approx. 60 kg
(excluding consumables) |
Dimensions, Weight (Packaged)
W x D x H (mm), (kg) |
Main unit with palette |
1140 (W) x 914 (D) x 645(H) mm ; approx. 69 kg
1140 (W) x 914 (D) x 894 (H) mm ; approx. 91 kg (Printer Stand included) |
| Printer Stand |
1115 (W) x 864 (D) x 237 (H) mm; approx. 22 kg |
| Power Supply |
Input power |
AC 100-120V（50/60Hz）、AC 220-240V（50/60Hz） |
| Power Consumption |
Operation: 100 W or less |
| Standby power consumption |
100 V - 120V |
5 W or less (10 W or less when IEEE1394 is mounted) |
| (At the low power mode) |
220 V - 240 V |
6 W or less (11 W or less when IEEE1394 is mounted) |
| Off |
1 W or less
(In compliance with Executive Order of the President of the United States of America) |
| Operational Environment |
Temperature: 15 - 30°C, Humidity: 10 - 80 % (Condensation free) |
| Acoustic Noise |
Acoustic pressure |
Operation: approx. 49 dB (A) or less, Standby: approx. 35 dB (A) or less |
| Acoustic power |
6.3 Bels or less |
| Line Accuracy |
+/-0.1 % or less
User adjustments necessary. Printing environment and media must match that used for the adjustments.
CAD paper required: Plain paper, CAD tracing paper, coated paper, CAD translucent matte film only |
| Detector and Adjustment |
Registration adjustment |
Automatic / Manual |
| Banding adjustment (Line Feed adjustment) |
Automatic / Manual |
| Line length adjustment |
Manual |
| Head slant adjustment |
Automatic |
| Color calibration |
No |
| Head gap adjustment |
Automatic / Manual |
| Non-firing detection |
Yes |
| Non-firing compensation |
Yes |
| Roll media remaining detection function |
Yes |
| Memory |
Standard Memory |
256 Mbyte |
| Expansion Slot |
None |
| Hardisk |
- |
- |
| Firmware |
Languages |
Printer Languages |
GARO (Graphic Arts language with Raster Operations)、HP-GL/2、HP RTL |
| Job Control |
CPCA |
| Status reply |
CPCA、SNMP-MIB（Standard MIB、Canon-MIB） |
| Type |
Flash ROM |
| Update |
Updated from USB, 1394, Ethernet port (Utility use) |
| Operation Panel |
Display |
Large LCD: 160 x 128 dots; Key x 12, LED x 5 |
| Language on operation panel |
US-English, Japanese |
| Languages |
US-English, French, German, Italian, Spanish, Chinese, Korean, Russian, Japanese (Kanji) |
| Interface |
USB2.0 Hi-Speed |
Type |
Built-in |
| Mode |
Full Speed (12 Mbit/sec), High Speed (480 Mbit/sec), Bulk transfer |
| Connector Type |
Series B (4 pins) |
| Ethernet |
Type |
Built-in |
| Standard |
IEEE 802.3 10base-T |
| |
IEEE 802.3u 100base-TX / Auto-Negotiation |
| |
IEEE 802.3 x Full Duplex |
| Protocol |
IPX/SPX (Netware 4.2(J), 5.0(J), 6.0(J))
SNMP (Canon-MIB), HTTP, TCP/IP, AppleTalk |
| IEEE1934 (option) |
Type |
Slot card type (Option) |
| Standard |
IEEE1394 - 1995, P1394a (Based on Draft 2.0), Half duplex,
Data/Strb differential serial |
| Data-transfer time |
100/200/400 Mbit/sec. |
| Connector Type |
In compliance with IEEE1394 - 1995, 6 pins, No power supply |
| Expansion Slot |
1 |
| |
| Print Head |
| Print Head |
Model |
PF-03 |
| Type |
Bubble-jet on demand |
| Head configuration |
6 colors integrated type (6 chips per print head x 1 print head) |
| Nozzle pitch |
1, 200 dpi x 2 |
| Nozzle per chip |
MBK: 5, 120 nozzles, each other color: 2, 560 nozzles |
| Droplet size |
4 pl (per color) |
| |
| Ink Tank |
| Ink Tank |
Model |
PFI-102 (MBK, BK, C, M, Y) |
| Supply |
Tubing system |
| Colors |
MBK x 2, BK, C, M, Y |
| Capacity |
Bundled starter ink : 90 ml, sales ink : 130 ml |
| Level detection |
Detected by dot count and electrode (Empty) |
| Smart chip |
Each ink tank is equipped with EEPROM which stores its ink level. |
| |
| Cutter |
| Model |
- |
| Type |
Automatic horizontal cutting （Rotary cutter), independent unit |
