Ask a Question

Printing on Postcards - TS702

Article ID: ART173105 | Date published: 01/07/2019 | Date last updated: 03/05/2019
 

Description

This article provides information regarding printing on postcards with the PIXMA TS702.

 

Solution

This article describes the procedure for printing on postcards.

  1. Load postcards in the printer.
     

  2. Select paper size and paper type from the printer

    Register Hagaki for paper size from the printer operation panel.
    Also, register Hagaki, IJ Hagaki, or Hagaki K for paper type, according to your purpose. When you print on the address side, register Hagaki.
     

  3. Select Paper Size and Media Type from the print dialog

    Select Postcard or Postcard Borderless for Paper Size from the print dialog. When you print on the address side, select Postcard.
    Select Auto Select for Media Type from the print dialog.


    figure: Paper Size and Media Type in the Print dialog
     

     Important

    • This printer cannot print on postcards that have photos or stickers attached.
       

  4. Uncheck Two-Sided


    figure: Two-Sided in the Print dialog


     Important

    • Two-sided printing is not possible for postcards, so remove the Two-Sided check mark. If you print with the Two-Sided check mark on, the printing result may not be as you intended.
       
    • You will get cleaner printing if you print the message side first and then print the address side.
       

  5. Click Print

    The printer prints according to the specified settings.

    TS702 Page


Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments