NOTE The computer and network device setup should be completed. - Otherwise, you are unable to use the machine in a network, even if you perform the following procedure.
- The structure of your computer or networked device, the existence of router functions, setting methods and security settings vary depending on your environment. For more information, see the instruction manual provided with the network device you are using, or contact the manufacturer. - Consult your network administrator in advance to use the machine in your office.
After confirmation, connect the machine to LAN according to the following procedures. You can connect the machine to wireless LAN or wired LAN according to your environment and devices. Switch its connection method to either wired LAN or wireless LAN. Switch the connection method to either wireless LAN or wired LAN according to your environments and devices. The default setting is "Wired LAN." 1.Press [  ] (Menu). 2.Select <Network Settings> with [  ] or [  ], and then press [OK].  When the system manager ID and system manager PIN are specified Use the numeric keys to enter the ID and number, and then press [  ] (Log In/Out). 3.When you need to switch, select <Select Wired/Wireless LAN> using [ ] or [ ], and then press [OK].
 4.Select <Wired LAN> or <Wireless LAN> using [ ] or [ ], and then press [OK].
 IMPORTANT When switched to wired LAN connection or wireless LAN connection - After you finish connecting the wireless LAN or wired LAN, uninstall the MF driver. Once uninstallation is complete, reinstall the MF driver. For more details, see "MF Driver Installation Guide".
Connect the machine to either wired LAN or wireless LAN. Connecting to Wired LAN NOTE You cannot use wired LAN and wireless LAN at the same time - The machine's default connect method is "Wired LAN."
1.Connect the machine to a router or a hub via LAN cable.
 2.Wait until the machine sets the IP address automatically (approx. 2 min). If you want to set the IP address manually, see the following. Connecting to Wireless LAN Two methods are provided for connecting to the wireless LAN or access point, connecting using WPS (Wi-Fi Protected Setup) function or connecting manually. NOTE You cannot use wired LAN and wireless LAN at the same time - The machine's default connect method is "Wired LAN." When using a wireless LAN connection, it is necessary to switch the connection method to "Wireless LAN."
- You can connect the machine to wireless LANs or wired LANs, but you cannot use at the same time. When using a wireless LAN connection, do not connect a LAN cable to the machine. This may cause malfunctions.
Check automatically obtained IP addresses. Checking the Network Connection As soon as wired/wireless LAN is connected, check the IP address. For details on the checking, see the following items. Check the operation by displaying the Remote UI of the machine. Checking Network Operation Check the operation by displaying the Remote UI of the machine. 1. Start the Web browser of a computer which is connected to a network. 2. Enter "http://IP address of the machine/" in the address field and press the [ENTER] key on the keyboard. See the "e-Manual" (HTML manual) in the CD-ROM supplied with the machine. Example: http://192.168.0.215/
 3. Check that the screen of the Remote UI is displayed.
 NOTE When Remote UI is not displayed - Whether the computer and hub are connected using a LAN cable - Whether the <Remote UI On/Off> is set to <On>
| 
