Using the Wireless Controller
Installing the Battery
Install the date battery (CR2025) into the Wireless Controller WL-DC100 before use.
Be particularly careful to keep the date batteries out of the reach of children. Seek medical assistance immediately if a child swallows a battery since corrosive battery fluids could damage the stomach or intestinal wall.
-
Place your fingertip on 
and press it in the direction of the arrow while placing another fingertip on 
and removing the battery holder.
-
Place the date battery in the battery holder with the negative terminal (-) facing up. Then replace the battery holder into the wireless controller.
Removing the Battery
To remove the date battery, pull it in the direction of the arrow.
| If you ever dispose of your camera, first remove the date battery for recycling according to the recycling system of your country. |
 |
Shooting/Playback
The wireless controller can be used to shoot or play back. The wireless controller can be operated from an approximate distance of up to 5 m (16.4 ft.) from the front remote sensor (2) and approximately 1 m (3.3 ft.) from the side remote sensor (1).
-
Shooting
- Press the 
/ 
button on the camera until the remote control icon appears in the display panel, then shoot the image.
-
Playback
appears on the display panel.
 The operable range of the wireless controller will shorten under the following circumstances.
- When the wireless controller is used at an angle to the remote sensor.
- When strong light strikes the camera.
- When the battery is weak.
|
- The movie editing and printing functions are not available.
- When you fix the camera to a tripod and shoot still images, aim the remote controller's transmitter at remote sensor 1 to operate the camera from the side without touching the camera. This prevents camera shake when shooting just like using a remote release. You should set [Wireless Delay] in the Rec. menu to [0 sec.] when you use this method.
|
