When making an overseas call, you may need to add a pause to the fax number.
Since signals are transmitted over long distances across a complicated channel, your call may not be connected without adding a pause after the country code or in front of the fax number. By adding a pause, enough time elapses before the machine starts dialing the number again.
1. Place your fax.
2. Press [
].
3. Specify the scanning settings as needed.
4. Enter the international access code using the numeric keys.
For more information on international access codes, contact your telephone company.
5. Press [
] (Pause) to enter a pause as needed.
- The letter <p> is displayed to indicate that a pause is added.
- The default pause length is two seconds*.
- To add more pauses into the dialing sequence, press [] (Pause) again.
| * | The default pause length varies depending on the country where you are using the machine. |
6. Enter the country code, the area code, and the fax/telephone number using the numeric keys.
7. Press [] (Pause) to add a pause to the end of the fax/telephone number as needed.
- The letter <P> is displayed at the end of the fax number.
- A pause added to the end of the number is set to 10 seconds.
8. Press [
] (Start).
