LCD error messages on MP810
| Article ID: ART123727 | | | Date published: 05/12/2015 | | | Date last updated: 05/13/2019 |
Description
Solution
LCD Error Messages
When an error has occurs, the error or message is displayed on the LCD. Take the appropriate action to clear the message.
|
Error or Message |
How to correct |
|---|---|
|
The following ink may have run out. Replacing the ink tank is recommended U041 |
If the lamp on the ink tank is flashing, ink may have run out.,ink may have run out. Replacing the ink tank is recommended. If printing is in progress and you want to continue printing, press the <OK> button with the ink tank installed. Then printing can continue. Replacing the ink tank is recommended after printing. The machine may be damaged if printing is continued under the ink out condition. |
|
The following ink has run out. Replace the ink tank. U163 |
Ink has run out. (The lamp on the ink tank flashes.) Replace the ink tan and close the Scanning Unit (Printer Cover). Continuous printing under the above condition may damage the machine. If you want to continue printing in this condition, you need to release the function for detecting the remaining ink level. Press and hold the Stop/Reset button for at least 5 seconds, and then release it. * With this operation, releasing the function for detecting the remaining ink level is memorized. Please be advised that Canon shall not be liable for any malfunction or trouble which may be caused by continuation of printing under the ink out condition. |
|
The remaining level of the following ink |
The remaining ink level cannot be correctly detected. Continuous printing under the above condition may damage the machine.
If you want to continue printing in this condition, you need to release the function for detecting the remaining ink level. Press and hold the Stop/Reset button for at least 5 seconds, and then release it. * With this operation, releasing the function for detecting the remaining ink level is memorized. Please be advised that Canon shall not be liable for any malfunction or trouble which may be caused by continuation of printing under the ink out condition. |
|
More than one ink tank of the following color is installed. U071 / Some ink tanks are not installed in place. U072 |
Possible causes are as follows:
|
|
The following ink tank cannot be recognized. U140 / U150 |
|
|
Auto head align has failed. Press OK |
Possible causes are as follows:
After carrying out the above measures, if the problem continues after aligning the Print Head again, press the <OK> button to dismiss the error message, and then perform Manual Print Head Alignment. |
| The device may be incompatible. Remove the device and check the manual supplied with the connected device. |
Disconnect the cable connecting the machine and the device, and then reconnect it. Depending on the model or brand of your device, you may have to select a PictBridge-compliant print mode on the device before connecting it to the machine. You may also have to turn on the camera or select Play mode manually after connecting the device to the machine. Perform necessary operations according your device's instruction manual. If the error is still not resolved, there is a possibility that you are using a digital camera or digital video camcorder that is not supported by this machine. Use a digital camera or digital video camcorder compatible with this machine. |
| The ink absorber is almost full. Press OK to continue printing. Contact the service center. |
The machine has a built-in ink absorber to hold the ink used during Print Head Cleaning, for example.
This error message indicates that the ink absorber is nearly full. Press the <OK> button to cancel the error so you can continue printing. However, because printing is disabled, once the ink absorber becomes completely full and until the ink absorber is replaced, you are recommended to contact a Canon service representative as early as possible. Service will soon be required. |
|
Print head is not installed. Install the |
If the print head is not installed, install the print head and perform print head alignment. When the print head is already installed, remove the print head and then reinstall it. If this error still remains, print head replacement or machine repair may be needed. For support and service options, sign into (or create) your Canon Account from the link below. |
|
The type of print head is incorrect. Install the correct print head. U052 |
Remove the print head and reinstall it. If this error still remains, print head replacement or machine repair may be needed. For support and service options, sign into (or create) your Canon Account from the link below. |
|
The card is currently write-enabled. Set to read-only mode before performing operation |
The Card Slot is set to Read/write mode. |
|
There are no photos in memory card. |
|
| Inner Cover is open. Close the inner cover and press OK. |
If the Inner Cover is open when starting printing, close it and then press the <OK> button on the machine. Do not open or close the Inner Cover while printing, as this can damage the machine. |
|
Release the scanner lock switch and turn the power off and back on. |
The Scanner Lock Switch is not released. Slide the Scanner Lock Switch to the release position |
|
Scanner is not operating correctly. / Error code |
Turn off the machine, and unplug the power cord of the machine from the power supply. After a while, plug the power cord of the machine back in, and then turn on the machine. If the same error occurs, service is required. |
and press the <ON/OFF> button to turn the machine off. Then, turn the power back on.