Use the following procedure to remove/replace the feed roller.

1. Open the document feed tray.
   
    
2. Raise the OPEN lever, and open the upper unit.
   
   
   
    
3. Lower the securing lever for the feed roller forward.
   
    
4. Slide the securing lever for the feed roller to the left.
   
    
5. Remove the feed roller, detaching the left side first.
   
    
6. Install the (new) feed roller, attaching the right side first.
   
    
7. Slide the securing lever for the feed roller to the right.
   
    
8. Slide the securing lever for the feed roller to the right.
   
    
9. Lower the securing lever for the feed roller until it clicks into place.
   
    
10. Close the upper unit by gently pushing down on the left and right sides. Push until it clicks into place to make sure that it is completely closed.
    
     
11. Close the document feed tray.