The delivery feeder unit may not be installed correctly. Follow the procedure below to install the delivery feeder unit correctly. If the error code persists after the delivery feeder unit is installed correctly, contact Canon Customer Care Center.

note:

• You have to remove the delivery feeder unit and reinstall the delivery feeder unit correctly.
• When you remove the delivery feeder unit, you have to turn the main power switch OFF.
• Sending or receiving documents cannot be done when the main power switch is OFF or the power cord is disconnected.
• If the main power switch is turned OFF, all jobs waiting in the print queue will be erased.
• Documents received into memory and documents stored for delayed send will be retained for approximately 60 minutes after the power cord has been disconnected.

1. Turn OFF the main power switch and disconnect the power cord.

If you are using the stack bypass tray, close it before opening the front cover. Open the front cover gently holding the handle (A).

3. Push the levers (A) on sides of the delivery feeder unit and remove the delivery feeder unit gently, holding it by the tabs (B).

attention:

Do not place any object on or touch the transfer belt (A) of the delivery feeder unit. You do not need to manually clean the transfer belt even when it is stained by toner, as the delivery feeder unit has a self cleaning function for the belt. Breaking the delivery feeder unit or damaging the transfer belt may result in misfeeds or deterioration in print quality.

4. Install the delivery feeder unit so that the protrusions (A) of the delivery feeder unit fit into the guides (B) and click into place.

5. Confirm that the triangle marks (A) on the delivery feeder unit are aligned with the triangle marks (B) on the machine.

6. Close the front cover.

Close the front cover gently holding the handle.

attention:

Be careful not to get your fingers caught.

7. Reconnect the power cord and turn on the main power switch.

If the error code persists after the delivery feeder unit is installed correctly, contact Canon Customer Care Center.