Ask a Question

Setting up Caller ID on the FAX-JX210P

Article ID: ART152504 | Date published: 05/22/2015 | Date last updated: 12/28/2015
 

Description

Setup the Caller ID feature on the fax machine to screen incoming calls.

Solution

Setting CALLER ID

When [CALLER ID] is set to [ON], the caller's name and phone/fax number appear on the LCD when you receive a call.

Note : To use this feature, you will need to subscribe for a Caller ID service. The Caller ID feature uses the Telcordia or the ETSI EN 300 778-1 protocol. Contact your local telephone company for detailed information on this service.

  1. Press <Menu>.

  2. Use to select [DATA REGSTRATION], then press <Start/Copy>.

  3. Use to select [CALLER ID], then press <Start/Copy>. The LCD displays [OFF].

    1. To disable Caller ID feature, use to select [OFF], then press <Start/Copy>.
    2. To enable Caller ID feature, use to select [ON], then press <Start/Copy>.

  4. Press <Stop/Reset> to return to standby mode.

SIMS Doc Id

0

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments