In most cases, Wireless Setup Using the USB cable can be used to connect your printer to a router.
Before you begin
-
If needed during the connection process, refer to the instruction manual for your router.
-
Router / SSID / Network Name - Identifies a specific wireless network
-
Network Key / Encryption Key / WEP Key / WPA/WPA2 Passphrase / Pre-Shared Key - Refer to a Wi-Fi® password
-
Don't connect the USB cable yet.
- Quit all applications before you start the installation.
​Set up wirelessly with a USB cable
-
Press the ON button to turn off the machine. Operating noise stops after about 30 seconds.
If the USB cable is already connected, unplug it. If a message appears on the computer, select Cancel.
-
Download and install the following drivers and software from the Canon USA website:
-
CUPS printer driver
-
Scanner driver
- Canon IJ Network Tool
You can also download and install other software from the website, such as the ICA driver, MP Navigator EX, and My Image Garden. These additional items aren't required to complete a wireless setup for your printer.
-
Connect a USB cable between the printer and computer.
-
Use the IJ Network Tool to configure the printer for wireless use.
If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.
Or if you still need help, visit our Canon Community by clicking the button below to get answers:
____________________________________________________________________________________________
