List of error messages that can appear when a Bubble Jet printer is connected to the camera PowerShot A75 and A85
| Article ID: ART157665 |
| |
Date published: 06/09/2015 |
| |
Date last updated: 12/09/2015 |
Description
List of error messages that can appear when a Bubble Jet printer is connected to the camera PowerShot A75 and A85
Solution
The following messages may appear when the camera is connected to the direct print compatible Bubble Jet Printer.
| Check the error number displayed on the control panel of Bubble Jet Printer and refer to the Bubble Jet Printer Quick Start Guide. |
(The message or error code may not display with some models.)
| Printer in use |
The printer is printing the data from the memory card inserted in the computer or printer. The printer automatically starts printing the images from the camera after completing the current printing. |
| Printer warming up |
Printer is warming up. When it is ready, the printer starts printing automatically. |
| No print head |
No print head is installed in the printer. |
| Printer cover open |
Close the printer cover securely. |
| Media type error |
You selected a paper type incompatible with the printer. Select a compatible paper type in the Print Style menu. |
| Paper lever error |
Adjust the paper selection lever to the proper position. |
| Low ink level |
The ink tank needs to be replaced soon. Prepare a new ink tank. If you select [Continue] in the error screen, you can restart printing. (This message will not appear on some models) |
| Waste tank full |
You can restart printing by pressing the <RESUME/CANCEL> button on Bubble Jet Printer. Please request replacement of the waste tank at your nearest Canon customer support center listed in the Bubble Jet Quick Start Guide. |
| Printer error |
Turn off the printer, then turn it on again. If the error persists, please consult your nearest Canon customer support center listed in the Bubble Jet Quick Start Guide. |
