Resending Faxes (Redialing a Busy Number) MX522
Article ID: ART141127 |
| |
Date published: 05/13/2015 |
| |
Date last updated: 08/17/2015 |
Solution
Resending Faxes (Redialing a Busy Number)
There are two methods of redialing: Automatic redialing and Manual redialing.
Automatic Redialing
If you send a document and the recipient's line is busy, the machine will redial the number after a specified interval.
Automatic Redialing
Manual Redialing
You can redial to the recipients dialed using the Numeric buttons.
Manual Redialing
ImportantIt may be possible that faxes will reach unintended recipients due to the misdialing or incorrect registration of fax/telephone numbers. When you send important documents, it is recommended that you send them after speaking on the telephone.
Sending a Fax after Speaking on Telephone
NoteAutomatic Redialing
You can enable or disable automatic redialing. If you enable automatic redialing, you can specify the maximum number of redial attempts and the length of time the machine waits between redial attempts.
Enable and specify the automatic redialing setting on Auto redial in Advanced FAX settings under FAX settings.
Advanced FAX settings
ImportantWhile automatic redialing, the unsent fax is stored in the machine's memory temporarily until the sending fax is complete. If a power failure occurs or you unplug the power cord before automatic redialing is complete, all faxes stored in the machine's memory are deleted and not sent.
NoteTo cancel automatic redialing, wait until the machine starts redialing, then press the Stop button.
To cancel automatic redialing, delete the unsent fax from the machine's memory while the machine is on-standby for a redial operation. For details, see Deleting a Document in Machine's Memory.
Manual Redialing
Follow the procedure below for manual redialing.
Make sure that the machine is turned on.
Confirming that the Power Is On
Press the FAX button.
The Fax standby screen is displayed.
Load documents on the platen glass or in the ADF.
Loading Originals
Adjust the scan contrast and resolution as necessary.
NotePress the Redial/Pause button.
The Redial screen is displayed.
Use the button to select the recipient's number to redial, then press the OK button.
Press the Color button for color transmission, or the Black button for black & white transmission.
Important
NoteFor manual redialing, the machine memorizes up to 10 recent recipients dialed using the Numeric buttons. Note that the machine does not memorize any recipients dialed using the Coded Dial or Redial/Pause button.
To cancel manual redialing, press the Stop button. To cancel a fax transmission while it is in progress, press the Stop button, then follow the instructions on the LCD.
If documents remain in the ADF after the Stop button is pressed while scanning is in progress, Document in ADF. Close the feeder cover and select to eject document. is displayed on the LCD. By pressing the OK button, the remaining documents are automatically ejected.