Search Results |
|
During scanning, an unknown error occurs.
|
|
Check Error Message on Control Panel (DR-G1130/G1100)
|
|
DR Scanner driver not found / TWAIN Error
|
|
Error "Scanner not found" when using CaptureOnTouch
|
|
Cleaning Guidelines for imageFORMULA Document Scanners
|
|
Handling a Double Feed (DR-G1130/G1100)
Handling a Double Feed When a double feed is detected while scanning, the document pages for which double feeding was detected are ejected at the eject outlet, an error message appears on the Control Panel display, and feeding stops. When a double feed is detected, the following process occurs, and messages appear according to the Rapid Recovery System setting in the ISIS/TWAIN driver.
|
|
|
Count-Only Mode (DR-G1130/G1100)
Verify Scan The scanner compares the document page count obtained from the Count-Only mode (or entered manually) with the actual count of document pages scanned, and an error message is displayed if the two counts do not match.
|
|
|
Replacing Imprinter Ink Cartridges (DR-G1130/G1100)
Replacing Ink Cartridges When closing the imprinter cover, make sure that it is locked so that it will not open unexpectedly. An error message appears on the display panel if the imprinter cover is open.
|
|
|
Roller Replacement Cycle (DR-G1130/G110)
As the rollers start to wear out, feeding quality declines, and document feed errors , such as paper jams, become more likely. If document feed errors continue to occur after cleaning the rollers, purchase the Roller Replacement Kit and replace the transport rollers (pickup, feed, and retard rollers).
|
|
|
Main Features (DR-G1130/G1100)
Scanner Features Variety of Scanning Modes The scanner is equipped with six scanning modes: Black and White, Error Diffusion, Advanced Text Enhancement, Advanced Text Enhancement II, 256-level Gray, and 24-bit Color. * Advanced Text Enhancement can clarify scanned text by processing background or foreground colors.
|
|