| Search Results |
 |
Scan Quick Tips - MG4120
|
To assist you in finding an answer to your inquiry, some of our most referred-to articles have been categorized in this document. When you find an article that closely matches your inquiry, click on it to open it. In some cases, that article will guide you to another document that includes detailed instructions for your model
|
|
|
"The Ink absorber is almost full" message - MG4120
|
Ink Absorber If your product issue was not resolved after following the steps above, or if you require additional help , please create or log in to your Canon Account to see your technical support options.
|
|
|
Configure the printer driver to the correct port - MG4120
|
Make sure that the printer port is configured appropriately. In Windows 7, select Devices and Printers from the Start menu. In Windows Vista, select the Start menu > Control Panel > Hardware and Sound > Printers. In Windows XP, select the Start menu > Control Panel > Printers and Other Hardware > Printers and Faxes .
|
|
|
Perform the wireless LAN setup manually using Standard Setup (Windows) - MG4120
|
Wireless Setup Using Standard Setup Refer to the instruction manual for the access point or the router you are using, or you may contact each manufacturer for help . - Access Point Name/Network Name * Also referred to as SSID.
|
|
|
Error occurred while files were being copied - MG4120
|
Firewall or Antivirus Software may be blocking the installation. Disable the firewall or contact vendor for help How to access the Windows Firewall settings
|
|
|
What to do when double printing occurs in your documents - MG4120
|
Perform a Print Head Alignment. The encoder film/strip may need to be cleaned If the above recommendations do not help you resolve the error, the printer will require servicing.
|
|
|
Printer not detected during Wireless LAN setup - MG4120
|
Firewall or Antivirus Software may be blocking the installation/detection. Disable the firewall or contact vendor for help How to access the Windows Firewall settings in Windows 8
|
|
|
Reset the MG4120 to the default settings
|
If your product issue was not resolved after following the steps above, or if you require additional help , please create or log in to your Canon Account to see your technical support options.
|
|
|
Confirm the correct scanner is selected (Macintosh) - MG4120
|
Specifying the Machine If multiple scanners exist on the network, multiple model names are displayed. In that case, you can select one scanner per model. For details, refer to the help file of the IJ Network Scanner Selector EX.
|
|
|
Re-Install the MG4120 MP Drivers
|
- When There is No Uninstaller If you are using Windows 7, click any icon in Printers and Faxes
|
|
