| Search Results |
 |
Connecting to a Printer and Printing Via a Wireless LAN (Wi-Fi) (EOS M100)
|
Follow these instructions when using the camera as an access point. To connect using another access point, please refer to the cameraâ s " Help Guide".
|
|
|
Wireless LAN (Wi-Fi) Legal information WUX7500 / WUX6700 / WUX5800
|
WUX7500/WUX6700/WUX5800 Frequency band( s ): 2 ,401 MHz – 2 ,473 MHz Maximum radio-frequency power: 12.7 dBm
|
|
|
QuickGuide to Speedlite 600EX-RT Optical Wireless Flash Setup
|
2 . Enable optical transmission on 600 EX -RT receiver unit( s ). Press the Wireless Flash Button until the <OPTICAL TRANSMISSION> icon and <SLAVE> appear. You can combine one or more 600EX-RTs as optical-based receiver units with any combination of
|
|
|
QuickGuide to Speedlite 600EX-RT Radio Wireless Flash Setup
|
1. To set the sender unit: Press the Wireless Flash Button until the RT icon (upper-right corner of the unit’s LCD screen) and <MASTER> appear. The wireless flash cycle via button is: Conventional on-camera flash > Radio-based Master unit > Radio-based Slave unit > Optical-based Master unit > Optical based Slave unit. 2 . To set the receiver unit( s ): Press the Wireless Flash Button until the RT icon and <SLAVE> appear.
|
|
|
Connecting to a Printer via a Wireless LAN (Wi-Fi) and Printing (EOS Rebel T7i/ EOS 800D)
|
1. Turn on the camera and the printer. 2 . Press the cameraâ s < > button.
|
|
|
Sending images to a Smartphone (Wireless Connection)
|
1. Turn the camera and the smartphone on. 2 . Press the cameraâ s [MENU] button to display the menu screen. IMPORTANT
|
|
|
What operating systems and terminals support Canon Mobile Printing? (SOHO Mobile Printing)(Apple)
|
Compatible Terminals iPhone 4, iPhone 4 S , iPhone 5, iPad, iPad 2 , and third generation iPad NOTE
|
|
|
Sending Images to a Smartphone (Wireless Connection) (EOS Rebel SL2/EOS 200D)
|
Activate the smartphoneâ s Wi-Fi function, then select the SSID (network name) checked in step 2 -C-5 ( ). For the password, enter the password checked in step 2-C-5 (
|
|
|
Connect Your Device Using Wireless Direct - PIXMA TS6020
|
2 . Change device settings and connect device( s ) to the printer
|
|
|
The Flash does not Fire during Wireless Flash Shooting
|
When the receiver unit( s ) is ready to fire (fully charged), the AF- assist beam will blink at 1-sec. intervals.
|
|
