Search Results |
 |
Wireless dual band router support
Wireless Dual Band Router Support PIXMA MP560 PIXMA MP640 PIXMA MP640R
|
|
 |
Setup the MP560 / MP640 for use over a wireless LAN - Mac OS X with multiple Access Points and single SSID
Use these instructions if your network has multiple AirPort Networking Devices (including Time Capsule, AirPort Extreme, AirPort Express, etc.) For example: AirPort Extreme AND Time Capsule. Select [Yes], then press the <OK> button. When wireless connection is enabled, the Wi-Fi lamp (B) lights blue. Select [Easy settings], then press the <OK> button.
|
|
 |
MP560 / MP640 / MP990 Initial Setup Mac OS X v10.6 / Mac OS X v10.7 (Lion)
button. When wireless connection is enabled, the Wi-Fi lamp (B) lights blue. Select Easy settings
|
|
 |
Change the machine settings MP560
LAN settings WPS settings Select when you perform settings for wireless LAN using Wi-Fi Protected Setup (WPS). Select Push button method
|
|
 |
Reset the Access Point or router (when using wireless connection)
|
 |
Setup the MP560 for use over a wireless LAN using Wi-Fi Protected Setup (WPS)
If an icon other than appears, improve the communication status by referring to the displayed message or the help file, then click Remeasurement Install the Software (Information)
|
|
 |
Set up the MP560 for Use Over a Wireless Network - macOS
Install the Software Repeat steps 2 and 3 for the MP560 Scanner Driver and the ICA Driver. ... If your product issue was not resolved after following the steps above, or if you require additional help , please create or log in to your Canon Account to see your technical support options. Or if you still need help , visit our Canon Community by clicking the button below to get answers:
|
|
 |
Scan Quick Tips - MP560
To assist you in finding an answer to your inquiry, some of our most referred-to articles have been categorized in this document. When you find an article that closely matches your inquiry, click on it to open it. In some cases, that article will guide you to another document that includes detailed instructions for your model
|
|
 |
Setup the MP560 for use over a wireless LAN (Windows)
important: An "Ad-hoc connection," which establishes a direct connection to the computer over wireless connection without using an access point, is not supported. Be sure to prepare an access point.
|
|
 |
Printer not responding (Wireless LAN) - MP560
When attempting to print in a wireless LAN environment, message Printer not responding may appear. There are several possible causes for this message. The computer and access point (or wireless router) have lost connection. Restart the computer and then attempt to print again.
|
|