Search Results |
|
Setting up the wireless printer after changing routers, router settings or networks (Windows)
Perform the following procedure to uninstall the MP drivers: MP620 / MP980 MX340 MX860
|
|
|
Change the machine settings (MP980)
Instructions to change the settings on the machine. WPS setting Select when you perform settings for wireless LAN using Wi-Fi Protected Setup (WPS). Select Push button method
|
|
|
Install the Driver / Software (USB Connection) - MP980
Installing the Software The USB port is located on the right side at the back of the machine. When using WPS ( Wi-Fi Protected Setup) or connecting an additional computer, make sure that the machine is turned on, then go to step 2. It is not necessary to connect the machine to the computer with a USB cable.
|
|
|
How do I find the WPS button on my wireless router?
|
|
Reset the Access Point or router (when using wireless connection)
|
|
Devices Which May Interfere with Wi-Fi Communication
Solution If your product issue was not resolved after following the steps above, or if you require additional help , please create or log in to your Canon Account to see your technical support options.
|
|
|
Setup the MP980 for use over a wireless LAN - Mac OS X with multiple Access Points and single SSID
Wireless LAN setup - Multiple Access Points, Single SSID 4. Select Change wireless / wired, then press the OK ... If you do not know your administrator name or password, click Help , then follow the on-screen instructions. ... 13. Select MP980 series and click OK. ... 24. Select Canon MP980 series… Click add
|
|
|
Connect the PIXMA MP980 Printer to a Wireless LAN
Macintosh setup ( Wi-Fi Protected Setup) ... The USB port is located on the right side at the back of the printer.When using WPS ( Wi-Fi Protected Setup) or connecting an additional computer, make sure that the printer is turned on, then go to step 2. It is not necessary to connect the printer to the computer with a USB cable. ... .If you do not know your administrator name or password, select Help
|
|
|
Install the Software (WPS Connection) - MP980
WPS Connection ... supports WPS ( Wi-Fi Protected Setup) ... ... . Select Change wireless /wired, ... ... using WPS ( Wi-Fi Protected Setup) ... using WPS ( Wi-Fi Protected Setup) or connecting an additional computer, make sure that the machine is turned on, then go to step 2. It is not necessary to connect the machine to the computer with a USB cable. ... If you do not know your administrator name or password, click Help , then follow the on-screen instructions.
|
|
|
Uninstall the MP drivers then reinstall to set up the printer for use over a wireless LAN- MP980
4. Select Change wireless / wired, then press the OK ... If you cannot go to the next procedure after 10 minutes, click Help ... is displayed, refer to displayed comments and Help for improving the status of communication link.
|
|