Search Results |
|
List of Messages (VIXIA HF G30)
... camcorder, an error message is displayed on ... ... recording mode to 5 Mbps for AVCHD ... ... /B writing error ... A memory card error occurred. File name error The folder and ... ... Wi-Fi error Incorrect encryption key ... ... Wi-Fi error Incorrect encryption method ... ... Wi-Fi error Incorrect authentication method ... ... set again An error occurred when connecting ... Movie must be less than X min. ... Try again An error occurred when connecting to the CANON iMAGE GATEWAY server or the server is temporarily down.
|
|
|
LED Display and Basic Operations - MG3120 / MG3122
When an error occurs ... details on the error codes , see " ... An Error Code Is Displayed on ... An error that requires contacting ... An Error Code Is Displayed on ... Maintenance Codes ... .5" x 11 " (Letter ... ... No Paper" Error Occurs Error Codes When an error occurs, E and numbers are displayed in order on the LED to indicate the error code . ... For details on the error codes , see An Error Code Is Displayed on the LED If an error code with P is displayed, an error that requires contacting the service center may have occurred. ... An Error Code Is Displayed on the LED
|
|
|
Uninstall the MP drivers then reinstall to set up the printer for use over a wireless LAN- MX860
Installing the Software Network Setup Troubleshooting If you want to select an access point manually, or if the target access point is not displayed in the list, or if an error message appears, refer to " 5 The following screen is displayed during setup" in the printed manual: . Windows Vista :
|
|
|
Change the Machine Settings MP450
Change Machine Settings Specifies the page size for printing photos saved in a mobile phone. 4" x 6" (101 x 152), 5 " x 7" (127 x 177), Credit card , 8.5" x 11 " (215 x 279), A4, Stickers < 2 > Media type
|
|
|
Setting the Wireless LAN Using WPS (MF8080/MF8380)
Setting the Machine Using WPS (Push Button Mode) When the wireless LAN router or access point is detected, the Wi-Fi indicator blinks. The screen below is displayed for approximately 2 seconds, and then the Wi-Fi indicator lights up. * If an error message appears, press [OK] to close the screen and follow the procedure again from Step 5 . If you cannot detect the access point after retrying, see "."
|
|
|
Change the machine settings (MP500 / MP800 / MP950)
Instructions to change the settings on the machine. Page size: Set the paper size for printing images located in a compatible mobile phone. Note: Available size: 8.5" x 11 " (215 x 279), A4, Stickers, 4" x 6" (101 x 152), 5 " x 7" (127 x 177), Credit card and 4" x 8" (101.6 x 203.2) Media type: Set the media type for printing images located in a compatible mobile phone.
|
|
|
Change the machine settings (MX330)
Settings on a PictBridge Compliant Device Paper size 4" x 6"/10 x 15 cm, 5 " x 7"*1, 8" x 10"/ 20 x 25 cm, A4, 8.5" x 11 "(Letter), 4" x 7.1"/ 10.1 x 18 cm*2 *1 10x15
|
|
|
Setting the Wireless LAN Manually
The next screen is displayed for approximately 2 seconds, and then the Wi-Fi indicator lights. * If an error message appears, press [OK] to close the screen, check to make sure that the network key is correct, and follow the procedure in 5 again. If you cannot connect the access point after retrying, see the following:
|
|
|
Setting the Wireless LAN Manually (MF8080/MF8380)
Setting by Manually Selecting an Access Point The screen below is displayed for approximately 2 seconds, and then the Wi-Fi indicator lights up. * If an error message appears, press [OK] to close the screen, check to make sure that the network key is correct, and follow the procedure again from step 5 . If you cannot connect to the access point after retrying, see "."
|
|
|
Print Using an Infrared Connection iP6220D / iP6600D / iP6700D
Untitled Document 8.5" x 11 " (215.9 x 279.4), A4, Stickers, 4" x 6" (101.6 x 152.4), 5 " x 7" (127 x 177.8), Credit card
|
|
|