| Search Results |
 |
Resolve Various Error Codes - PIXMA MP495 / MP499 Printer
|
Part 1: Alarm light flashes orange Installing / Replacing cartridge( s )
|
|
|
All EF and EF-S mount lenses are compatible.
|
|
How to print using the mobile terminal such as a smartphone in a wireless LAN
|
For the wireless setup for the Android terminal, follow the instructions below. NOTE: The procedures below are the ones for GALAXY S SC-02 B (Android 2.2). Step 1.
|
|
|
420EX Speedlite: Here is a basic wireless flash setup.
|
Sample Wireless Flash System You can easily set up an E-TTL autoflash system with the 550EX, ST-E2 or MR-14EX as the sender unit and the 420EX as the receiver unit. Just set the 420 EX's wireless selector to <receiver> and position the receiver unit( s ) as desired within the wireless transmission range
|
|
|
550EX Speedlite : How to turn the Master Flash OFF and use just receiver unit(s).
|
The flash ratio can also be changed by changing the distance of the receiver units to the subject. With the EOS 1D, 1 V , 3, D60, D30, Elan 7/7E and 30/33, you can use the modeling flash to check the lighting effect
|
|
|
580EX Speedlite : How to prevent the sender unit from firing its flash.
|
You can disable the sender unit from firing so that only the receiver unit( s ) will fire a flash. Press the button so that the display blinks as shown on the left Disable the sender unit's flash firing
|
|
|
430EX Speedlite : Other useful features available when using Full Automatic Wireless Flash.
|
Flash exposure compensation and other setting set with the sender unit will also be automatically set in the receiver units. Thus, you need not operate the receiver unit( s ). Wireless flash with the following setting can be done in the same way as with normal flash shooting
|
|
|
550EX Speedlite : How to set the communication channel on the Speedlite.
|
To prevent your sender unit from firing another photographer's receiver units, four channels are provided to differentiate your receiver units from unrelated ones. The sender unit and receiver unit( s ) in the same wireless flash system must be set to the same channel No.
|
|
|
How to set the communication channel on the 430EX II Speedlite.
|
The settings you input with the sender unit attached to the camera are also automatically transmitted to the receiver units which are controlled by the sender unit via wireless. Therefore, you need not operate the receiver unit( s ) at all during the shoot.
|
|
|
Adjust the location of network device(s)
|
Adjust the location of network device( s )
|
|
