Wireless Setup page to assist you in setting up your printer on your network. Click the appropriate link( s ) below for help . If you have already set up your printer on the network with one computer and want to set up additional computers to work with your printer
For the wireless setup for the Android terminal, follow the instructions below. NOTE: The procedures below are the ones for GALAXY S SC-02 B (Android 2.2). Step 1.
Sample Wireless Flash System You can easily set up an E-TTL autoflash system with the 550EX, ST-E2 or MR-14EX as the sender unit and the 420EX as the receiver unit. Just set the 420 EX's wireless selector to <receiver> and position the receiver unit( s ) as desired within the wireless transmission range
You can disable the sender unit from firing so that only the receiver unit( s ) will fire a flash. Press the button so that the display blinks as shown on the left Disable the sender unit's flash firing
Flash exposure compensation and other setting set with the sender unit will also be automatically set in the receiver units. Thus, you need not operate the receiver unit( s ). Wireless flash with the following setting can be done in the same way as with normal flash shooting
To prevent your sender unit from firing another photographer's receiver units, four channels are provided to differentiate your receiver units from unrelated ones. The sender unit and receiver unit( s ) in the same wireless flash system must be set to the same channel No.