Content Source
Connection Type
Operating System
Pages [Next]
Search Results
CMS-XML The Flash does not Fire during Wireless Flash Shooting
When the receiver unit( s ) is ready to fire (fully charged), the AF- assist beam will blink at 1-sec. intervals.
CMS-XML Sending still images and movies from a camera to a smartphone (Wi-Fi function)
Choose the displayed SSID (network name) from the smartphone` s Wi-Fi setting menu. Enter the encryption key
CMS-XML How to print using the mobile terminal such as a smartphone in a wireless LAN
For the wireless setup for the Android terminal, follow the instructions below. NOTE: The procedures below are the ones for GALAXY S SC-02 B (Android 2.2). Step 1.
CMS-XML How to set the communication channel on the 430EX II Speedlite.
For details on wireless flash photography and operating the sender unit, see the sender unit's instruction manual. The procedure below applies to a sender unit attached to the camera and receiver unit( s ) controlled by wireless .
CMS-XML 550EX Speedlite : How to set the communication channel on the Speedlite.
To prevent your sender unit from firing another photographer's receiver units, four channels are provided to differentiate your receiver units from unrelated ones. The sender unit and receiver unit( s ) in the same wireless flash system must be set to the same channel No.
CMS-XML 420EX Speedlite: Here is a basic wireless flash setup.
Sample Wireless Flash System You can easily set up an E-TTL autoflash system with the 550EX, ST-E2 or MR-14EX as the sender unit and the 420EX as the receiver unit. Just set the 420 EX's wireless selector to <receiver> and position the receiver unit( s ) as desired within the wireless transmission range
CMS-XML 430EX Speedlite : Other useful features available when using Full Automatic Wireless Flash.
Flash exposure compensation and other setting set with the sender unit will also be automatically set in the receiver units. Thus, you need not operate the receiver unit( s ). Wireless flash with the following setting can be done in the same way as with normal flash shooting
CMS-XML 550EX Speedlite : How to turn the Master Flash OFF and use just receiver unit(s).
Make sure the sender unit's pilot lamp is lit and the receiver units are ready Press the pilot lamp to test the wireless transmission Focus the subject and take the picture.
CMS-XML How to use the wireless remote control for the EOS Digital Rebel.
With the optional Remote Controller RC-5 (optional), you can shoot remotely from up to about 5 meters/16.4 ft. in front of the camera. Point the signal transmitter toward the camera' s remote control sensor and press the signal button.
CMS-XML Sending images to a computer (Wi-Fi function) (PowerShot N)
Step 1: Preparing necessary items 1. Check the computer` s requirements. The camera can connect to the following computers via wireless LAN.
Pages [Next]