| Search Results |
 |
580EX II Speedlite : How to prevent the sender unit from firing its flash.
|
You can disable the sender unit from firing so that only the receiver unit( s ) will fire a flash. Press the button so that the display blinks as shown on the left Disable the sender unit's flash firing
|
|
|
How to set the communication channel on the 430EX II Speedlite.
|
The settings you input with the sender unit attached to the camera are also automatically transmitted to the receiver units which are controlled by the sender unit via wireless. Therefore, you need not operate the receiver unit( s ) at all during the shoot.
|
|
|
All EF and EF-S mount lenses are compatible.
|
Evolution of the EOS system Data communication has accordingly changed over time, and occasionally a new camera will be launched that modifies how data is transmitted between body and lens. For example, when E-TTL was launched with the EOS Elan II camera in 1995, its aperture stop-down communication was altered compared to previous EOS cameras. Again, all Canon-made EF lenses had processors able to accomodate the shift in data transmission, and worked without modification.
|
|
|
Adjust the location of network device(s)
|
Adjust the location of network device( s )
|
|
|
550EX Speedlite : How to turn the Master Flash OFF and use just receiver unit(s).
|
How to turn the Master Flash OFF and use just receiver unit( s )
|
|
|
Recording from Analog Video Devices (VCR, TV or Camcorder) to an Optura 60
|
Recording from Analog Video Devices (VCR, TV or Camcorder) Optura 60 You can input video from other analog devices (VCR, TV or camcorder) via the S -video terminal or AV terminal, and record the input video on the tape in the camcorder. You can also record the input video as a movie or still image on a memory card.
|
|
|
430EX Speedlite : Other useful features available when using Full Automatic Wireless Flash.
|
Flash exposure compensation and other setting set with the sender unit will also be automatically set in the receiver units. Thus, you need not operate the receiver unit( s ). Wireless flash with the following setting can be done in the same way as with normal flash shooting
|
|
|
Setup the MX860 for use over a wireless LAN
|
Wireless Setup page to assist you in setting up your printer on your network. Click the appropriate link( s ) below for help. If you have already set up your printer on the network with one computer and want to set up additional computers to work with your printer
|
|
|
Supplied Accessories for the VIXIA HV40 camcorder
|
Lithium Button Battery CR2025 for Wireless Controller CTC-100/ S Component Cable (Red/Green/Blue Plugs) STV-250N Stereo Video Cable (Yellow/Red/White Plugs)
|
|
|
Setup the MP990 for use over a wireless LAN (Windows)
|
Wireless Setup Step-by-step instruction is available on our Wireless Help page to assist you in setting up your printer on your network. Click the appropriate link( s ) below for help.
|
|
