| Search Results |
 |
Using Eye-Fi Cards
|
” is displayed, an error occurred while retrieving the card information. Turn the camera’s power switch off and on again.
|
|
|
Disable or change security software or firewall settings to allow proper communication
|
Try the following procedures when communication errors or messages such as 'Communication with the Card Slot failed' or 'An error occurred while reconnecting ( drive letter, xxxCanon_memory , where xxx is the MAC Address)' appear on the computer. example
|
|
|
List of Messages (VIXIA HF R30 / HF R32 / HF R300)
|
... -in memory error ... in memory writing error Attempt to recover ... ... inserted a MultiMedia Card (MMC) ... ... There was an error creating the file ... ... A memory card error occurred. ... inserted a MultiMedia Card (MMC) ... File name error - The folder ... Mem. Card Number of scenes ... Mem. Card Unable to recognize ... ... Memory card writing error Attempt to recover ... ... position of the card's LOCK switch was ... Message Solution Error writing to external ... ... Message Solution An error occurred during FTP ... An error occurred while communicating ... ... 802.11 g . ... Wi-Fi error Incorrect authentication method ...
|
|
|
List of Messages (VIXIA M50 / HF M52 / HF M500)
|
Built-in memory error ... Built-in memory writing error Attempt to recover the data? ... - You inserted a MultiMedia Card (MMC) into the camcorder. ... - There was an error creating the file name. ... - A memory card error occurred. ... - You inserted a MultiMedia Card (MMC) into the camcorder.
|
|
|
List of Messages (VIXIA HF R50/R52/R500)
|
... -in memory error ... in memory writing error ... A memory card error occurred. ... inserted a MultiMedia Card (MMC) ... File name error The file or ... Mem. Card Mem. Card ... Memory card writing error ... position of the cards LOCK switch was ... Message Solution Error writing to external ... Wi-Fi error ... Wi-Fi error ... Wi-Fi error ... Connect to a computer and use the dedicated software to set again An error occurred when connecting to the CANON iMAGE GATEWAY server. ... Try again An error occurred when connecting to the CANON iMAGE GATEWAY server or the server is temporarily down.
|
|
|
Paper Jams
|
If you cannot remove the paper or the paper tears inside the printer, or if the paper jam error continues after removing the paper, service is required. ... If the narrow width paper such as card sized paper is jammed due to loading it in the landscape orientation, remove the jammed paper following the procedure below. ... Do not load the narrow width paper such as card sized paper in the landscape orientation.
|
|
|
Get Ink Status / Replace ink tank(s) MX7600
|
With the LCD of this Machine An error message may be displayed ...
|
|
|
Firmware Information and Updating (Mac) - PRO-100
|
Firmware Version Update Procedure For models with card slots, remove all the cards if they are inserted in the card slots. ... If an error message is displayed, the possible causes are as follows: ... Doing so may cause an error . ... During the update, the error lamp on the printer will flash orange.
|
|
|
How to Update Firmware via USB cable
|
Firmware Version Update Procedure For models with card slots, remove all the cards if they are inserted in the card slots. ... If an error message is displayed, the possible causes are as follows: ... so may cause an error . ... During the update, the error lamp on the printer will flash orange.
|
|
|
List of Messages (VIXIA mini X)
|
File name error The folder and file numbers have reached their maximum value. ... Memory card writing error Attempt to recover the data? ... This message will appear the next time you turn on the camcorder if power supply was accidentally interrupted while the camcorder was writing on the memory card and later the position of the cards LOCK switch was changed to prevent erasure.
|
|
