| Search Results |
 |
List of Messages (VIXIA mini X)
|
Check the CANON iMAGE GATEWAY settings and try setting Camera Web Link again. Check network settings An error occurred during authentication with the CANON iMAGE GATEWAY server . Make sure the date and time set in the camcorder are correct.
|
|
|
List of Messages (VIXIA HF R62/R60/R600)
|
Check the connection point, SSID and other network settings. Connect to a computer and use the dedicated software to set again An error occurred when connecting to the CANON iMAGE GATEWAY server . Check the settings saved on CANON iMAGE GATEWAY and set them again in the camcorder.
|
|
|
List of Messages (VIXIA HF R50/R52/R500)
|
Install ImageBrowser EX and CameraWindow in your computer and configure the settings using CANON iMAGE GATEWAY. Connect to a computer and use the dedicated software to set again An error occurred when connecting to the CANON iMAGE GATEWAY server . Check the settings saved on CANON iMAGE GATEWAY and set them again in the camcorder.
|
|
|
Sharing the Printer on a Network - iP2700 / iP2702
|
In case an error occurred when a document is printed by the client system to a shared printer, the error message of Canon IJ Status Monitor will be displayed on the client system and the print server system. For regular printing, Canon IJ Status Monitor will be displayed only on the client system.
|
|
|
List of Messages (VIXIA HF R30 / HF R32 / HF R300)
|
Message Solution An error occurred during FTP communication File transfer was not completed - Turn off the camcorder and FTP server . After a short while, turn them on again and try to send the data again. An error occurred while communicating to the computer (Network Utility) File transfer was not completed - Cordless phones, microwave ovens, refrigerators and other appliances may interfere with the wireless signal.
|
|
|
System Requirements (MF7400 series)
|
System Requirements Mail forwarding server software Mail receiving server software ... fax to mail servers using SMTP. ... from a mail server using the POP ... If the latter method is used, it is not necessary for the mail server to support the POP3 protocol. - The machine can receive I-fax images and error e-mail messages sent when errors occur during communication, but not any other type of e-mail. ... Servers ... Microsoft Windows Server 2003 and Internet Information Services 6.0 ... FTP server for imageWARE Gateway ... Servers ... Microsoft Windows Server 2003 ... Server software for sending data
|
|
|
How to Initialize network settings on the SX80 Mk II / SX800
|
... field for the error report, and ... ... to which the error report is sent ... ... copy of the error report is sent ... [SMTP server IP address] ... available SMTP mail server [SMTP server port number] ... available SMTP mail server [SNTP server IP address] ... available SNTP mail server can be omitted ... [ Error report]: ... /OFF the error report sending function ... ... the SMTP mail server authentication is required ... ... [POP3 server IP address] ... the POP3 server ... [POP3 server port number] ... the POP3 server (The factory ...
|
|
|
Sending images to a computer (Wi-Fi function) (EOS 70D)
|
However, this option can only be used in environments using DHCP servers , or access points or routers with DHCP server functionality, such that IP addresses and related settings are assigned and configured automatically. If an error is displayed even though the IP address and related settings is set to be automatically assigned and configured, select [Manual setting].
|
|
|
Reset Printing System then reinstall drivers MP240 / MP250 / MP270
|
It may be necessary to reset the Printing System. Uninstall then the drivers if error messages occur or if the device does not operate correctly.
|
|
|
Error Messages About Wireless LAN Connection
|
