For the wireless setup for the Android terminal, follow the instructions below. NOTE: The procedures below are the ones for GALAXY S SC-02 B (Android 2.2). Step 1.
- If the wireless router is using MAC address filtering, enter the camcorder's MAC address in the wireless router's configuration screen. Wi-Fi cannot be used while the wireless microphone is attached - The camcorder��������� s Wi-Fi functions cannot be used while the optional WM- V 1 Wireless Microphone is connected to the camcorder. Disconnect the microphone from the MIC terminal and turn it off.
The instructions in this chapter assume you already have a correctly configured and working network, network device( s ) and/or Wi-Fi access point. If necessary, refer to the documentation provided with the network devices you want to use.
Using the Machine from Additional Computers If the machine is already connected to a wireless / wired connection, it can be used from additional computers on the same network.
If the color of print results is different from the picture( s ) on the display, it can be adjusted by changing the value of the color balance and intensity.
Configure the Port Correctly 4. Click the Ports tab to confirm the port settings. Make sure that a port named USBnnn (where "n" is a number) with Canon XXX Printer appearing in the Printer column is selected for Print to the following port( s ). If the port setting is not correct, reinstall the MP Drivers or change the port setting according to the interface you are using.
With the LCD of this Machine ( B ) Empty ink tank. "Printer detected ink out condition. Stop printing, then replace the ink tank." (when printing is in progress) / "Printer detected ink out condition of the following ink. Replace the ink tank." (when printing is not in progress) U172
The printer is not connected to the computer via a USB cable. The printer is turned off. The downloaded file( s ) is not for the printer software upgrade.
The printer is not connected to the computer via a USB cable. The printer is turned off. The downloaded file( s ) is not for the printer software upgrade.