| Search Results |
 |
List of Messages (VIXIA HF R30 / HF R32 / HF R300)
|
- If the wireless router is using MAC address filtering, enter the camcorder's MAC address in the wireless router's configuration screen. Wi-Fi cannot be used while the wireless microphone is attached - The camcorder��������� s Wi-Fi functions cannot be used while the optional WM-V1 Wireless Microphone is connected to the camcorder. Disconnect the microphone from the MIC terminal and turn it off.
|
|
|
Setting up additional computer(s) for use over wireless LAN (Macintosh) - MX350 / MX870
|
Using the Machine from Additional Computers If the machine is already connected to a wireless / wired connection, it can be used from additional computers on the same network. ... After configuring the wired / wireless settings on the printer and the setup completed on one computer, it can be used on additional computers on the same network. ... Click 'Exit' on the installation complete screen, then start again from step 2 and be sure to select Use the printer on network
|
|
|
How to print using the mobile terminal such as a smartphone in a wireless LAN
|
For the wireless setup for the Android terminal, follow the instructions below. NOTE: The procedures below are the ones for GALAXY S SC-02 B (Android 2.2). Step 1.
|
|
|
System Requirements (MP160)
|
To successfully install and use the software, your system must meet the following requirements: * 2 Microsoft? s authorized drivers are available through Windows Update or Service Pack installation. Any non-Microsoft USB 2.0 drivers are not guaranteed.
|
|
|
Using Wi-Fi to Playback Photos on a Computer (XC10)
|
The instructions in this chapter assume you already have a correctly configured and working network, network device( s ) and/or Wi-Fi access point. If necessary, refer to the documentation provided with the network devices you want to use.
|
|
|
Setting the IP Address (IP v. 4)
|
2 . Enter "arp - s <IP address> <MAC address>", and then press the [ENTER] key on your keyboard.
|
|
|
Verification of Correct Playback via Browser/Browser Remote Operation by OS and Browser (EOS C100 Mark II)
|
Supported OS (*1) Browser Supported devices AVCHD MP4 PHOTO 35Mbps 24/ 17 /4/3Mbps L/ S Playback Save Playback Save Playback Save Playback Save iOS 6 Safari iPhone/iPad (* 2 ) NO NO NO NO YES NO YES YES(*4) iOS 7 Safari iPhone/iPad (* 2 ) NO NO YES NO YES NO YES YES(
|
|
|
MF Toolbox freezes when scanning on a Mac
|
If MFToolbox quit unexpectedly when launching or freezes when trying to scan, move third party data source files from the TWAIN Data Source folder*. web site. *If there is only the Canon Data Source (in the case of network-capable models, there will be 2 sources), then delete the file( s ) following the steps below, then download and install the latest scanner driver from the Download Library at the Canon USA You can temporarily move the data source to another location such as the desktop or if the file is no longer in use move it to Trash
|
|
|
Installing the DVC Storage Driver in Macintosh
|
How do I install the DVC Storage Driver in Macintosh? 1. Connect the camcorder to an AC outlet. 2 . Attach the supplied USB cable to the computer' s USB port and the camcorder' s USB terminal. 3. Set the camcorder to Card Play (VCR) mode.
|
|
 |
User Support Tool
|
3 - 2 B l a n k P a p e r i s O u t p u t o r U n k n o w n D a t a i s P r i n t e d A f t e r S t a r t i n g t h e F i r m w a r e U p d a t e Cause The firmware update was started without switching the machine to download mode.
|
|
