| Search Results |
 |
The camera cannot be connected with a computer/The computer does not recognize the camera
|
1. A Wi-Fi connection is established ... Other devices, such as computers, cannot be used with the camera by connecting them with an interface cable while the camera is connected to devices via Wi-Fi . Terminate the Wi-Fi connection before connecting the interface cable. ... In this case, replace the battery with a charged one, use the DC Coupler DR-E18 and AC Adapter AC-E6N (each sold separately).
|
|
|
The camera cannot be connected with a computer / The computer does not recognize the camera (EOS 90D)
|
1. A Wi-Fi connection is established If the camera is already connected via Wi-Fi , it cannot communicate with any computer connected with an interface cable (sold separately). ... In this case, replace the battery with a charged one, use the DC Coupler DR-E6 and AC Adapter AC-E6N (each sold separately).
|
|
|
Wireless Setup for the imageCLASS LBP215dw (Contains Video) (Windows)
|
Part 1: Canon imageCLASS Wireless Help Video for a Windows Computer HERE
|
|
|
Wireless Setup for the imageCLASS MF543dw, MF445dw, MF448dw, MF449dw, LBP227dw, and LBP228dw - (Contains Video) (Windows)
|
MF445dw, MF448dw, MF449dw, LBP227dw, and LBP228dw printers to do wireless printing, scanning, and faxing depending on your specific model. It contains a Canon imageCLASS Wireless Help Video that provides complete instructions for setting up your printer and Macintosh Computer. Additionally we have broken out the steps in two written parts as shown below.
|
|
|
Wireless Setup for the imageCLASS MF424dw, MF426dw, MF429dw, and MF525dw (Contains Video) (Windows)
|
Part 1: Canon imageCLASS Wireless Help Video for a Windows Computer HERE
|
|
|
Printing Photos from Social Media Services - Easy-PhotoPrint Editor
|
This will log you out from the social media service(s) you logged into. Note If you are using a mobile device, tap the Help Menu icon
|
|
|
The camera cannot be connected with a computer / The computer does not recognize the camera (EOS M10)
|
If there is insufficient charge left in the camera battery, the camera cannot communicate with EOS Utility. In this case, replace the battery with a charged one, or use an AC adapter kit ACK-E17 (available separately). Your computer does not supply power to the camera through the interface cable.
|
|
|
The camera cannot be connected with a computer/The computer does not recognize the camera
|
1. [ Wi-Fi /NFC] is set to [Enable] ... : Wi-Fi /NFC] is set to [Enable], connection via interface cable or HDMI cable is disabled. ... : Wi-Fi /NFC] to [Disable] before connecting a cable. ... In this case, replace the battery with a charged one, or use an AC adapter kit ACK-E10 (available separately).
|
|
|
The camera cannot be connected with a computer / The computer does not recognize the camera (EOS REBEL T6/EOS 1300D)
|
1. [ Wi-Fi /NFC] is set to [Enable] If [ Wi-Fi /NFC] is set to [Enable] under the cameraâs [ ... Set [ Wi-Fi /NFC] to [Disable], then connect the interface cable. ... In this case, replace the battery with a charged one, or use an AC adapter kit ACK-E10 (available separately).Your computer does not supply power to the camera through the interface cable.
|
|
|
The Camera Cannot Be Connected with a Computer / The Computer Does Not Recognize the Camera (EOS 5D Mark IV)
|
1. Camera's Wi-Fi is set to [Enable] If [Built-in wireless settings]'s [ Wi-Fi /NFC] is set to [Enable] under [ ... In this case, replace the battery with a charged one, or use an AC adapter kit ACK-E6 (Separately available).Your computer does not supply power to the camera through the interface cable.
|
|
