| Search Results |
 |
Pellix QL : Checking the battery level status
|
Set the film speed graduation of the shutter dial at ASA 100 and set " X " at the index mark . Lift up the outer sensitivity ring of the shutter dial and turn. An accurate check cannot be made if settings other than those mention above are used.
|
|
|
244T Speedlite : How to do flash photography in the program mode.
|
mark lights up, the shutter speed switched to X -sync (1/60 sec. with T50 and 1/90 sec. with T70, T80 and T90) automatically.
|
|
|
Try another memory card in the camera and other troubleshooting steps.
|
On Camera LCD screen displays No Memory Card, Memory Card Error , Unrecognized File Format, Incompatible JPEG, or "?" marks for images when card is inserted in the camera or while attempting to Playback images.
|
|
|
Rendering Subsystems may be causing a 'Windows was unable to print the test page' error
|
Rendering Subsystems may be causing a 'Windows was unable to print the test page' error 2) If, while implementing the above step, an error message appears stating that the above changes cannot be saved, close the win.ini anyway, open Windows Explorer, find the win.ini file under C:\windows, right-click on it, go to Properties, take the check mark off from the "read-only" box, click on Apply, and
|
|
|
What the error warning messages mean in stopped-down photography.
|
If you exposure a frame in this situation, it will be incorrectly exposed due to incorrect coupling of the aperture ring. To prevent this before you mount a lens , make sure there is no red dot beside the stop-down coupling lever inside the camera body Second possible problem arises if you push in the camera's stop-down lever and before taking a shot, release the stop-down lever and return the lens aperture ring to the "A" mark .
|
|
|
Error: Bidirectional Support is Required for Your Printer – Windows
|
Enable bidirectional support On your keyboard, hold the windows key and press X Click Control P
|
|
|
List of messages and their explanations that appear on ZR200 and ZR300
|
Direct Print Related Messages PAPER ERROR There is a problem with the paper. ... MEDIA TYPE ERROR You attempted to use a paper size/type that is not supported by the printer. INK ERROR There is a problem with the ink. ... FILE ERROR You attempted to print an image that was recorded with another camcorder, with a different compression, or was edited on a computer. ... COULD NOT PRINT X IMAGES You attempted to use the print order settings to print X images that were recorded with another camcorder, with a different compression or were edited on a computer.
|
|
|
Clearing jam from inside the machine L170
|
Clearing jam from inside the machine When removing the jammed paper; do not touch the transfer roller (shaded part) as its surface is very delicate and susceptible to finger oil and scratches , which may lead to print deterioration. ... If the levers are left pushed down, the paper jam error will not be resolved.
|
|
|
Responding to Error Messages
|
|
Troubleshooting Error Messages
|
