| Search Results |
 |
Batteries may need to be recharged or replaced.
|
Batteries may need to be recharged or replaced if an error persists after battery recharge, or the unit may require a service evaluation. If the battery is currently in the device, and it is not working properly, remove the batteries and wait for 30 seconds and re-insert the batteries. In doing so, if your camera has a back-up or date and time battery, remove this battery as well.
|
|
|
Error: CONNECT THE COMPACT POWER ADAPTER - HG10
|
When the camcorder is in PLAYBACK mode and is connected to the computer, this message will appear if the camcorder is being powered by the battery pack. Connect the compact power adapter to the camcorder.
|
|
|
Error Message VIXIA HF W10 _ HF W11
|
The clock is reset about one month after the battery is depleted. Therefore, “SET DATE/TIME!” will appear the next time the power is turned on. Set the clock again after charging the battery.
|
|
|
List of error messages on a DC300 series DVD camcorder
|
List of Messages The camcorder cannot enter the Quick Start standby mode while the disc is being recognized after it was inserted or if the remaining battery charge is too low. CANNOT PLAYBACK
|
|
|
List of error messages on a HG10 camcorder
|
List of Messages You have not set the time zone, date and time. This message appears each time you turn the power on until you set the time zone, date and time. CHANGE THE BATTERY PACK
|
|
|
List of error messages on a DC40 DVD camcorder
|
List of Messages You have not set the time zone, date and time. This message appears each time you turn the power on until you set the time zone, date and time. CHANGE THE BATTERY PACK
|
|
|
CHG (charge) indicator flashing while charging the battery pack with the VIXIA HF S30
|
Charging has completed. Indications when errors occur one flash at 0.5-second intervals
|
|
|
Explanation of the CHG (charge) indicator flashing while charging the battery pack VIXIA HF G10 and XA10
|
Charging has completed. Indications when errors occur one flash at 0.5-second intervals
|
|
|
List of error messages on a VIXIA HF100 camcorder
|
List of Messages The data transfer rate was too high for the memory card in use and the recording was stopped. Replace the memory card with one rated Speed Class 2 or higher.. CANNOT COMMUNICATE WITH THE BATTERY PACK CONTINUE USING THIS BATTERY PACK?
|
|
