| Search Results |
 |
How to combine divided clips using MP4 Join Tool (Windows)
|
Make sure to save clips recorded with this camcorder to a computer. To do so, you will need a card reader connected to a computer or a computer with an SD card slot. For details on transferring files from the SD card, refer to the computerâ s instruction manual or OSâ s help modules.
|
|
|
Explanation of the assist Functions (Zebra, Peaking, B&W and Peaking) for the VIXIA HF-S camcorders
|
Explanation of the assist Functions (Zebra, Peaking, B &W and Peaking) for the VIXIA HF- S camcorders
|
|
|
Specifications for the ZR80, ZR85, and ZR90
|
Input/Output Terminals Audio output: -10 dBV (47 kohm load)/3 kohms or less Audio input: -10 dBV/40 kohms or more DV Terminal Special 4-pin connector (IEEE 1394 compliant) Headphone Terminal 3.5 mm stereo mini-jack USB Terminal (ZR90/ZR85) mini- B S -video Terminal (ZR90) 1 Vp-p/75 ohms (Y signal), 0.286 Vp-p/75 ohms (C signal)
|
|
|
Specifications for the Optura 400 and Optura 500
|
Input/Output Terminals 3.5 mm stereo mini-jack -57 dBV (with 600 ohm mic)/5 kohms or more (MIC ATT OFF) -37 dBV (with 600 ohm mic)/5 kohms or more (MIC ATT ON) USB Terminal mini- B S -video Terminal 1 Vp-p/75 ohms (Y signal), 0.286 Vp-p/75 ohms (C signal)
|
|
|
Specifications for the ZR60, ZR65mc, and ZR70mc
|
Input/Output Terminals Audio input: -10 dBV/40 kohms or more DV Terminal Special 4-pin connector (IEEE 1394 compliant) Headphone Terminal 3.5 mm stereo mini-jack USB Terminal (ZR65mc/ZR70mc ) mini- B S -video Terminal 1 Vp-p/75 ohms (Y signal), 0.286 Vp-p/75 ohms (C signal) MIC terminal input ?3.5 mm stereo mini-jack -57 dBV (with 600 ohm mic)/5 kohms or more
|
|
|
How to use an EX series Speedlite with the GL2.
|
The bounce flash on the 420EX and 550EX Speedlites cannot be used with the GL2. The 420EX/550EX/580EX' s multiple Speedlite control and the Speedlite Transmitter ST-E2 cannot be used with the GL2. In dark recording situations, during autofocus, a assist light may be sent out by the Speedlite to illuminate the subject while you hold the camcorder' s PHOTO button halfway down.
|
|
|
Using an iOS/Android device to control the camcorder from another location after setting it up in your home (Remote Control+Streaming) (VIXIA HF R60/R62)
|
mark on the underside of the CT- V 1 s camcorder base plate. For details, refer to the instruction manual of the CT-V1.
|
|
|
Recording movies streamed from the camcorder when it is in another location in your house using an iOS or Android device as a remote control (Remote Control+Streaming)
|
mark on the underside of the CT- V 1â s camcorder base plate. For details, refer to the instruction manual of the CT-V1.
|
|
 |
Troubleshooting
|
The card is partitioned. -The card was initialized using a camcorder with a different firmware version.Tobeabletorecordonthecard,save the recordings it contains and then initialize it using this camcorder. SD Card ASD Card B / SD Card B SD Card A S witched - The camcorder switched to recording on the other card after you pressed the SLOT SELECT button or automatically duetorelayrecording.
|
|
|
Setting the Microphone (XA40 / XA45)
|
When one of the audio channels is set to the INPUT terminals and the corresponding sensitivity selection switch is set to MIC or MIC+48 V , you can select the external microphoneâ s sensitivity. 1. Set the POWER switch to CAMERA. 2. Press the MENU button.
|
|
