FiltersClear
CMS-CATEGORY_REF
Content Source
Connection Type
Products
 
 
Pages [Next]
Search Results
CMS-XML Recording in the Manual Mode on the XL H1 camcorder
Available settings ... 1.6, F1.8, F2.0, F2.2, F2.4, F2.6, F2.8, F3 .2, F3 .4, F3 .7, F4.0, F4.4, F4.8, F5.2, F 5.6 , F6.2, F6.7, F7.3, F8.0, F8.7, F ...
CMS-XML Compatibility with external microphones
Can this digital video camera use external microphones? Stereo microphones with a plug diameter of 3.5 mm are compatible, and condenser microphones are recommended. The microphone must be self powered, and have an impedance of 600 ohms.
CMS-XML Using external microphones with the HV20, HV30, or HV40 camcorders
Attaching other microphones terminal. Use commercially available condenser microphones with their own power supply. You can connect almost any stereo microphone with a 3.5 mm plug but the audio recording level may vary.
CMS-XML Specifications for the ZR80, ZR85, and ZR90
Input/Output Terminals AV Terminal 3.5 mm minijack Video: 1 Vp-p/75 ohms unbalanced
CMS-XML Specifications for the Optura 400 and Optura 500
Input/Output Terminals AV Terminal 3.5 mm minijack Video: 1 Vp-p/75 ohms unbalanced
CMS-XML HV20 camcorder specifications
Input/Output Terminals AV In/out Terminal ΓΈ 3.5 mm minijack Video: 1 Vp-p/75 ohms unbalanced
CMS-XML Specifications for the Optura 600
Input/Output Terminals Audio: Output: ?10 dBV (47 kohm load)/3 kohms or less; Input: ?10 dBV/40 kohms or more DV Terminal Special 4-pin connector (IEEE 1394 compliant) Headphone Terminal 3.5 mm stereo mini-jack MIC Terminal 3.5 mm stereo mini-jack
CMS-XML Specifications for the ZR60, ZR65mc, and ZR70mc
Input/Output Terminals AV Terminal 3.5 mm minijack Video: 1 Vp-p/75 ohms unbalanced
CMS-XML Specifications for the ZR830 and ZR850 camcorders
Input/Output Terminals AV Terminal 3.5 mm minijack, ZR850 : Video output only, Audio input/output;
CMS-XML XL H1 camcorder specifications
Input/Output Terminals BNC jack, output only, 1 Vp-p/75 ohms Headphone Terminal 3.5 mm stereo mini-jack -23.5 dBv (16 ohm load)/50 ohms LANC Terminal
Pages [Next]