| Search Results |
 |
What lenses are compatible with Correction for Peripheral Illumination and Chromatic Aberration?
|
IASES HJ22 ex 7.6 B IASES CJ 45 ex 9.7 B CJ 45 ex 13.6 B CJ 24 ex 7.5 B CJ14ex4.3B CJ 18 ex 7.6 B - - (*1) Requires B 4 mount adapter. Also, chromatic aberration can be corrected if connecting with a 12-pin serial connection interface for dcasting.
|
|
|
Connecting to a Printer and Printing Via a Wireless LAN (Wi-Fi) (EOS M100)
|
Follow these instructions when using the camera as an access point. To connect using another access point, please refer to the cameraâ s " Help Guide".
|
|
|
The Flash does not Fire during Wireless Flash Shooting
|
When the receiver unit( s ) is ready to fire (fully charged), the AF- assist beam will blink at 1-sec. intervals.
|
|
|
Specifications of the 550EX Speedlite.
|
Optical pulse transmission Configuration Camera, sender unit, and receiver unit( s ) Wireless Switchover With wireless selector Wireless Selector Positions
|
|
|
What lenses are compatible with Correction for Peripheral Illumination and Chromatic Aberration? (EOS C700 FF / EOS C700 FF PL )
|
The following lenses support for chromatic aberration correction,but not support for peripheral illumination correction. ENG broadcasting lenses (2/3" mount)(*1) HJ 14 ex 4.3 B IASES HJ18 ex 7.6 B IASES HJ24 ex 7.5 B IASES HJ17 ex 7.6 B IASES HJ22 ex 7.6 B IASES CJ 45 ex 9.7 B CJ 45 ex 13.6 B CJ 24 ex 7.5 B
|
|
|
QuickGuide to Macro Speedlite MR-14EX and MT-24EX
|
The MR-14EX and MT-24EX are fully compatible with the Canon Speedlite wireless flash system. Because the MR- 14 EX /MT-24 EX already comprise units A and B of a wireless flash group, you would normally set any additional unit( s ) as a receiver assigned to group C. Be sure to set A: B C ratio. The Macro Lite’s A and B tubes will light the main subject.
|
|
|
How to set the communication channel on the 430EX II Speedlite.
|
For details on wireless flash photography and operating the sender unit, see the sender unit's instruction manual. The procedure below applies to a sender unit attached to the camera and receiver unit( s ) controlled by wireless .
|
|
|
QuickGuide to Speedlite 600EX-RT Radio Wireless Flash Setup
|
1. To set the sender unit: Press the Wireless Flash Button until the RT icon (upper-right corner of the unit’s LCD screen) and <MASTER> appear. The wireless flash cycle via button is: Conventional on-camera flash > Radio-based Master unit > Radio-based Slave unit > Optical-based Master unit > Optical based Slave unit. 2. To set the receiver unit( s ): Press the Wireless Flash Button until the RT icon and <SLAVE> appear.
|
|
|
550EX Speedlite : How to set the communication channel on the Speedlite.
|
To prevent your sender unit from firing another photographer's receiver units, four channels are provided to differentiate your receiver units from unrelated ones. The sender unit and receiver unit( s ) in the same wireless flash system must be set to the same channel No.
|
|
|
Sending images from a camera to an Android smartphone
|
Pressing the Mobile Device Connect button to connect with the smartphone, and saving images from the camera to the smartphone. B -1. Press the cameraâ s < Mobile device connect > ( ) button.
|
|
