Search Results |
|
Connecting to a Printer and Printing Via a Wireless LAN (Wi-Fi) (EOS M100)
Follow these instructions when using the camera as an access point. To connect using another access point, please refer to the cameraâ s " Help Guide".
|
|
|
QuickGuide to Speedlite 600EX-RT Optical Wireless Flash Setup
2 . Enable optical transmission on 600 EX -RT receiver unit( s ). Press the Wireless Flash Button until the <OPTICAL TRANSMISSION> icon and <SLAVE> appear. You can combine one or more 600EX-RTs as optical-based receiver units with any combination of
|
|
|
QuickGuide to Speedlite 600EX-RT Radio Wireless Flash Setup
1. To set the sender unit: Press the Wireless Flash Button until the RT icon (upper-right corner of the unit’s LCD screen) and <MASTER> appear. The wireless flash cycle via button is: Conventional on-camera flash > Radio-based Master unit > Radio-based Slave unit > Optical-based Master unit > Optical based Slave unit. 2 . To set the receiver unit( s ): Press the Wireless Flash Button until the RT icon and <SLAVE> appear.
|
|
|
Connecting to a Printer via a Wireless LAN (Wi-Fi) and Printing (EOS Rebel T7i/ EOS 800D)
1. Turn on the camera and the printer. 2 . Press the cameraâ s < > button.
|
|
|
Sending images to a Smartphone (Wireless Connection)
1. Turn the camera and the smartphone on. 2 . Press the cameraâ s [MENU] button to display the menu screen. IMPORTANT
|
|
|
QuickGuide to Canon Integrated Speedlite Transmitter Operation
1. Set up the camera for Integrated Speedlite Transmitter operation. 2 . Set up the off-camera Speedlite( s ) for wireless control. This QuickGuide will describe both steps.
|
|
|
Sending Images to a Smartphone (Wireless Connection) (EOS Rebel SL2/EOS 200D)
Activate the smartphoneâ s Wi-Fi function, then select the SSID (network name) checked in step 2 -C-5 ( ). For the password, enter the password checked in step 2-C-5 (
|
|
|
QuickGuide to Speedlite Transmitter ST-E3-RT Setup
2 . To set the receiver unit( s ): Press and hold down the Wireless Flash Button until the RT icon and <SLAVE> appear.
|
|
|
The Flash does not Fire during Wireless Flash Shooting
When the receiver unit( s ) is ready to fire (fully charged), the AF- assist beam will blink at 1-sec. intervals.
|
|
|
550EX Speedlite : How to turn the Master Flash OFF and use just receiver unit(s).
Press the pilot lamp to test the wireless transmission ... With sender flash OFF, you can use one receiver unit as a wireless off-camera Speedlite ... With the EOS 1D, 1V, 3, D60, D30, Elan 7/7 E and 30/33, you can use the modeling flash to check the lighting effect
|
|