| Search Results |
 |
Why Connect via Wireless LAN (the Wi-Fi Function)? (EOS REBEL T6 / EOS 1300D)
|
Solution By connecting to a Wi-Fi network or other device supporting this cameraâ s wireless functions, you can perform tasks such as sending images or controlling the camera. Connect to a smartphone
|
|
|
Connecting to a Printer and Printing Via a Wireless LAN (Wi-Fi) (EOS M100)
|
Follow these instructions when using the camera as an access point. To connect using another access point, please refer to the cameraâ s " Help Guide".
|
|
|
Sending Images to a Computer Using EOS Utility 2.14 (Wi-Fi Function) (EOS 6D)
|
Step 2. Performing Basic Camera Settings The following settings must be performed before the cameraâ s Wi-Fi fuction is used. 1. Set the cameraâs power switch to <ON>.
|
|
|
Sending Images to a Smartphone (Wireless Connection) (EOS Rebel SL2/EOS 200D)
|
A Wi-Fi connection cannot be established with the NFC function between this camera and a smartphone while they are connected via Bluetooth. To connect this camera to an NFC-compatible smartphone via Wi-Fi , the smartphoneâ s Wi-Fi and NFC functions must be enabled.
|
|
|
The Flash does not Fire during Wireless Flash Shooting
|
When the receiver unit( s ) is ready to fire (fully charged), the AF- assist beam will blink at 1-sec. intervals.
|
|
|
The Camera Cannot Be Connected with a Computer / The Computer Does Not Recognize the Camera (EOS 5D Mark IV)
|
1. Camera's Wi-Fi is set to [Enable] If [Built-in wireless settings]' s [ Wi-Fi /NFC] is set to [Enable] under [ Connecting the Camera to a Computer using a USB Cable (EOS 5D Mark IV).
|
|
|
How to select an AF point on the EOS 20D and EOS 5D and EOS 30D.
|
The AF point is used for focusing. The AF point can be selected automatically by the camera or manually by you. Automatic AF point selection is set in the Basic Zone modes and <A DEP>. In the <P> <Tv> <Av> <M> modes, you can switch between automatic and manual AF point selection. , right , top If focus cannot be achieved with an EOS-dedicated, external Speedlite? s AF- assist beam, select the center AF point.
|
|
|
Using EOS Utility 3.x to Send Images to a Computer (Wi-Fi Function) (EOS 90D)
|
] ). The Wi-Fi connection will be terminated if you set the cameraâs power to < OFF >, or open the card slot/battery compartment cover. With a Wi-Fi connection established, the cameraâ s auto power off does not function.
|
|
|
The camera cannot be connected with a computer / The computer does not recognize the camera (EOS 6D Mark II)
|
1. [Wi-Fi/NFC] is set to [Enable] If [ Wi-Fi ] is set to [Enable] under the cameraâ s [
|
|
|
The camera cannot be connected with a computer / The computer does not recognize the camera (EOS REBEL T6/EOS 1300D)
|
1. [Wi-Fi/NFC] is set to [Enable] If [ Wi-Fi /NFC] is set to [Enable] under the cameraâ s [
|
|
