Search Results |
|
CINEMA EOS C300 & C500
The tonal gradation still retains a generous 6.7 T-stops below the 18% reference gray level. ... The information supplied here should aid in the design of a conversion to Cineon or alternatives. ... This information will aid the design of conversion from Canon-Log to linear or other spaces.
|
|
|
Manual Focus on the EOS C700 models
Manual Focus [Peaking] and [Magnification]. When the HDMI OUT terminal's resolution is set to 4096 x 2160 or 3840 x 2160, the assistance functions will not be displayed on the monitor connected to the HDMI OUT terminal.
|
|
|
Names of Parts (EOS C500 Mark II)
Camera mounting screws. ( 6.7 mm (0.26 in.) deep) Accessory shoe with socket for 1/4"-20 mounting
|
|
|
EOS c500 & C300
|
|
CINEMA EOS
The EOS C700 offers broad options in 4K / UHD origination and capture – and a pivotal design strategy was to address this 4K focusing challenge. An innovati ve electronic viewfinder (EVF) u ses a 0.7 -inch OLED panel having fu ll 1920 x 1080 resolution to offer the cinematographer a significant aid t o focusing. The camera also embodies the latest in the Dual Pixel CMOS Auto Focus system which , in combination with face detection , supports a variety of options in precision auto focusing.
|
|
|
Eye controlled focus and focus techniques
contrast detection Phase-difference detection EOS-1Ds Mark III No TTL-AREA-SIR with a CMOS sensor 19 AF points (cross-type) and 26 Assist AF points (total 45 points) - - EOS-1Ds Mark II No TTL-AREA-SIR with a CMOS sensor 45 AF points (Area AF) - - EOS-1Ds No TTL-AREA
|
|
|
whitepaper-ergonomic-operational-enhancement-eosc300markii.pdf
Figure 19 The Mon output 3G SDI interface and HDMI interface carries certain camera assist information and the WFM to the external display. 13
|
|
|
Displaying the Electronic Level When Shooting (EOS-1D X)
Solution You can display electronic level in the viewfinder and on the LCD monitor to help correct camera tilt. CAUTION
|
|
|
The camera is not recognized by the computer (Windows 7) (EOS Utility Ver.3.x)
1. Change the USB port that is connected with the camera If multiple USB ports are available on the computer, switching the cable to another port may help the camera to be recognized correctly. 2. Use [Device Manager]
|
|
|
Set the Minimum Shutter Speed for Auto ISO - EOS-1D C or EOS-1D X
Setup procedure If your product issue was not resolved after following the steps above, or if you require additional help , please create or log in to your Canon Account to see your technical support options.
|
|