| Search Results |
 |
Compatible lenses and attachable lenses(MT-26EX-RT)
|
EF Macro Lenses EF50mm f /2.5 Compact Macro EF100 mm f /2.8 Macro EF100mm f /2.8 Macro USM EF100mm f /2.8L Macro IS USM *1 EF180mm f /3.5L Macro USM *2 EF- S 35 mm f /2.8 Macro IS STM EF- S
|
|
|
Compatible lenses and attachable lenses(MR-14EX II)
|
RF35 mm f /1.8 Macro IS STM EF Macro Lenses EF50mm f /2.5 Compact macro EF100 mm f /2.8 Macro EF100mm f /2.8 Macro USM EF100mm f /2.8L Macro IS USM *1 EF180mm f /3.5L Macro USM *2 EF- S 35 mm
|
|
|
Added Control with Speedlite 470EX-AI's Personal Functions
|
As mentioned above, this use of a single tap on the camera’s shutter button to maintain the same bounce angle will work with the Speedlite’s bounce angle switch in either the “ S ” or “ F ” positions. Personal Function 09 — Manual bounce flash, at the 0° setting Yes, even with the technology built into the Speedlite 470EX-AI to automate the process of setting bounce flash angle, it’s possible to do the following:
|
|
|
The 320EX Speedlite will provide flash coverage for the following focal lengths.
|
• When using an EF- S lens with a focal length of 32 mm or longer or an EF lens with a focal length of 50 mm or longer, extend the flash head for greater flash output and longer flash range. • When the flash head is extended, the <TELE> lamp on the Speedlite lights or blinks.
|
|
|
QuickGuide to Speedlite 600EX-RT Optical Wireless Flash Setup
|
3. Speedlite 600EX-RTs used as receiver units in an evenpower set-up can be assigned to any group — A, B or C. (Groups D and E are not available in optical wireless mode.) 4 . Position the camera and receiver unit( s ) within the correct operating range (10 meters/33 feet indoors), and so that the flash sensors on the front of the receiver units (under the Canon logo) are pointed toward the master.
|
|
|
580EX II Speedlite : How to prevent the sender unit from firing its flash.
|
You can disable the sender unit from firing so that only the receiver unit( s ) will fire a flash. Press the button so that the display blinks as shown on the left Disable the sender unit's flash firing
|
|
|
The camera show E in Creative Zone when using the 580EX II
|
CFn-05-1 is geared for EOS -series film cameras .Do not set it if you have a. EOS DIGITAL camera or the E0 S REBEL T2 / 300 _ If CFn-5-1 is set for such cameras, the flash control will not work properly The flash might not fire of it might fire only at full output With Type-A cameras, if C.Fn-05-1 is set, wireless autoflash shooting will not be possible,
|
|
|
How to set the communication channel on the 430EX II Speedlite.
|
The settings you input with the sender unit attached to the camera are also automatically transmitted to the receiver units which are controlled by the sender unit via wireless. Therefore, you need not operate the receiver unit( s ) at all during the shoot.
|
|
|
QuickGuide to Canon Speedlite 580EX II Modes and Functions
|
When set to "Off" the Sender and receiver( s ) will automatically output the same amount of light. When set to "A:B" you can adjust the auto-exposure ratio between the Sender (A) and receivers (B). When set to "A:B C" you can adjust the autoexposure ratio between the Sender (A) and receivers (B) while adding a separate, independent group of receivers (C).
|
|
|
550EX Speedlite : How to turn the Master Flash OFF and use just receiver unit(s).
|
How to turn the Master Flash OFF and use just receiver unit( s )
|
|
