Search Results |
|
EOS R6 Mark II: Flash Function Settings
Flash Function Settings ) is available when using a compatible Speedlite. This mode automatically reduces flash output by one stop and increases ISO speed by one stop. Useful in continuous shooting, and helps conserve flash battery power.
|
|
|
EOS R6 Mark II: Specifications
Specifications 22 min. 22 hr. ... Microphone DM- E 1D ... Auto limit for E -TTL ... Auto limit for E -TTL ... filter/Creative assist are not supported ... USB battery charging / camera ... ... RS-60 E 3 Battery Compatible battery packs LP- E 6NH ... / LP- E 6N ... / LP- E 6 USB battery charging/Camera ... ... Adapter PD- E 1 AC- E 6N DR- E 6 ... charged LP- E 6NH LP- E 6N ... / LP- E 6
|
|
|
EOS R6 Mark II: Part Names
Part Names Self-timer lamp/AF- assist beam ... Grip ( battery compartment)
|
|
|
EOS R6 Mark II: Safety Instructions
Safety Instructions Keep batteries out of the ... ... seek immediate medical assistance . The battery is dangerous if ... ... seek immediate medical assistance . ... /COIN CELL BATTERY ... /coin cell batteries are hazardous and ... These batteries can cause severe ... ... /coin cell battery has been swallowed ... ... using commercially available batteries or provided battery packs. Use batteries / battery packs only with ... ... Do not heat batteries / battery packs or expose ... ... Do not charge batteries / battery packs using non ... ... not use leaking batteries / battery packs. ... When disposing of batteries / battery packs, insulate ...
|
|
|
EOS R6 Mark II: Information Display
Basic information display for still photos HDR output status/View Assist ... Battery level
|
|
|
EOS R6 Mark II: High ISO Speed Noise Reduction
High ISO Speed Noise Reduction : AF- assist beam firing ... , replace the battery or card, or switch to B
|
|
|
What battery grip is compatible with the EOS R6 Mark II?
The EOS R6 Mark II uses the BG -R10 battery grip . Thank you gillmardesigns of the Canon Community
|
|
|
EOS R6 Mark II: Battery Information
Battery Information Registering Batteries to the Camera Labeling Batteries with Serial Numbers ... of a Registered Battery Not in Use ... Deleting the Registered Battery Information ... conditions of the battery you are using ... ... By registering multiple batteries to the camera ... : Battery info. ... (1) Battery position ... ) Model of battery or household power ... ... (3) Battery level indicator ( ... with the remaining battery level, in ... ... with the current battery . ... reset when the battery is charged. ... ) State of battery recharge performance, ... ... Green): Battery recharge performance is ... ... Green): Battery recharge performance is ...
|
|
|
EOS R6 Mark II: Inserting/Removing Batteries
Insertion You cannot use batteries other than Battery Pack LP- E 6NH /LP-E6N /LP-E6
|
|
|
EOS R6 Mark II: Charging the Battery
Charging the Battery If the battery's remaining capacity () is 94% or higher, the battery will not be charged. The provided charger cannot charge any battery other than Battery Pack LP- E 6NH /LP-E6N
|
|