| Search Results |
 |
Fax Settings Menu L170
|
Terminal ID is printed outside the ... INSIDE IMAGE; Terminal ID is printed inside the ... 2.TEL NUMBER MARK Selects the prefix for the identification header number. ... 3 to 9 (7 ... PRINT ERROR ONLY ... Prints a report only when a transmission error occurs. ... PRINT ERROR ONLY Prints a report only when a reception error occurs. ... REMOTE RX ID You can dial code on the remote extension to start
|
|
|
LCD Messages FAX-JX200
|
LCD Messages ... fax encounters an error . In either case, if the error does not clear, try unplugging the fax. ... An error requiring servicing might have occurred. ... If the same error occurs, service is required. ... DATA ERROR ... An error has occurred and all onetouch speed dialing, coded speed dialing, and user data have been lost. ... When the fax sends or receives a document, it assigns it a unique identification number (nnnn). ... An error requiring servicing might have occurred. ... If the same error occurs, contact a Canon service representative.
|
|
|
Setting Receive Result Reports to Print Automatically
|
Setting Receive Result Reports to Print Automatically ID : 8201415700 _ EN _ 1 ... If an error code is displayed, see the "e-Manual" (HTML manual) in the CD-ROM supplied with the machine. ... If you want to print the report only when a receive error occurs: ... ] to highlight <Only When Error Occurs>, and then press [OK].en (2) Proceed to step 5.
|
|
|
User Settings Menu
|
User Settings Menu at the top of each fax page you send. - TX TERMINAL ID ... Selects the error alarm volume.
|
|
|
Printing Reports and Lists Manually
|
Printing Reports and Lists Manually ID : 8201417100 _ EN _ 1 ... If an error code is displayed, see the "e-Manual" (HTML manual) in the CD-ROM supplied with the machine.
|
|
|
Paper Handling
|
Paper Handling ID : 8201618700 _ EN _ 1 ... Small documents (for example, index cards )
|
|
|
Fax Error Codes for L120
|
|
Fax Error Codes (L90)
|
|
Change Remote RX ID on B95
|
Change Remote RX ID number from the default setting (25).
|
|
|
ERROR LCD "System Error EXXX" (L100)
|
