Search Results |
|
Printer Settings Menu L170
Printer Settings Menu 1.PRESET PRINT QTY Sets the standard number of pages of the printer function. 01 to 99 (01 ) 2 .AUTO ERROR SKIP Sets either printing with skipping an error automatically,
|
|
|
User Support Tool
2 Make Sure That the Error Indicator Is Off Make sure that the Error indicator on the operation panel of the machine is off. If the indicator is lit up or blinking, check the error message on the display of the machine, and refer to the manual supplied with the machine to resolve the error.
|
|
|
Changing the volume settings B95
Volume Control 0 (off), 1, 2 or 3 Set the fax to ring (in FaxTel, FaxOnly) ON or OFF Set the volume of the line (Hook) monitor (sound during dialing). 0 (off), 1, 2 or 3 Set the volume of the error alarm sound. 0 (off), 1, 2 or 3 Set the volume of the error keypad.
|
|
|
Setting Send Result Reports to Print Automatically
] to highlight <Only When Error Occurs>, and then press [OK].( 2 ) Press [
|
|
|
Setting Receive Result Reports to Print Automatically
] or [ ] to highlight <Only When Error Occurs>, and then press [OK].en ( 2 ) Proceed to step 5. 5. Press [
|
|
|
Adjusting the Volume Control. L90
Adjusting the Volume Control. L90 2 . Press [ ... (0-3 ( 2 ... )) 2 . CALLING TONE Sets the volume of the ring produced when the machine detects a call. (0-3 ( 2 ... (0-3 ( 2 ... )) 4. ERROR TONE Beeps when and error (e.g, TX ERROR ) occurs. (0-3 ( 2
|
|
|
Changing the volume settings FAX-JX200 / JX210P
Volume Control 0 (off)/1/ 2 /3 ... 0 (off)/1/ 2 /3 ... Set the volume of the error alarm sound. 0 (off)/1/ 2 /3 ... 0 (off)/1/ 2 /3 ... 1/ 2
|
|
|
Adjusting/Changing the Volume settings (L80)
Adjusting/Changing the Volume Settings /3 ALARM VOLUME Selects the error alarm volume. 0(off)/1/ 2
|
|
|
Setting Receive Result Reports to Print Automatically
If an error code is displayed, see the "e-Manual" (HTML manual) in the CD-ROM supplied with the machine. ... 2 . Press [ ... ( 2 ) Proceed to step 5. ... ( 2 ) Proceed to step 5. If you want to print the report only when a receive error occurs: ... ] to highlight <Only When Error Occurs>, and then press [OK]. ( 2 ) Proceed to step 5.
|
|
|
Setting Send Result Reports to Print Automatically
If an error code is displayed, see the "e-Manual" (HTML manual) in the CD-ROM supplied with the machine. ... 2 . Press [ ... ( 2 ) Proceed to step 5. ... ( 2 ) Press [ ... If you want to print the report only when a send error occurs: ... ] to highlight <Only When Error Occurs>, and then press [OK]. ( 2 ) Press [
|
|