| Search Results |
 |
Set RX (Receive) Start Speed to a slower setting (FAX-JX200)
|
If phone line conditions are less than perfect, transmission (send) and reception (receive) problems can occur. Decrease the reception (RX or receive) speed if frequent fax transaction error messages appear on the LCD.
|
|
|
Sending a fax on the FAX-JX200
|
Sending Documents If an error occurs during sending, the fax beeps intermittently for a few seconds and an error message appears on the LCD. If this happens, correct the problem and then press <Stop>, then try sending the document again.
|
|
|
LCD Messages FAX-JX200
|
When an error has occurs, the error or message is displayed on the LCD. Take the appropriate action to clear the message.
|
|
|
Changing the volume settings FAX-JX200 / JX210P
|
Volume Control ALARM VOLUME Set the volume of the error alarm sound. 0 (off)/1/2/3
|
|
|
Setting ECM TX to ON / OFF (FAX-JX200)
|
Enable / disable ECM (Error Correction Mode) when sending a fax. * Select [ON] to send faxes with error correction. If telephone line conditions are poor, the time to send a fax will take longer.
|
|
|
Printing a report on the FAX-JX200
|
Depending on the type of report, you can have the fax print the report automatically, or you can print it directly. The TX report, RX report, MULTI TX/RX report, and Memory clear report* can only be printed automatically. See REPORT SETTINGS on how and when reports are printed automatically. Normally the fax does not print an activity report for transmitting, but you can set the fax to print an activity report every time you send a document. You can set the fax to print an activity report only when an error occurs during transmitting.
|
|
|
Settings and Activity Reports- FAX-JX200
|
Note: Set the volume of the line monitor (sound during dialing). Set the volume of the error alarm sound. Set the volume of the keypad.
|
|
